Nail Pullers / Hand Tools - Page 2 - Super Savings! Save up to 36%


Super Savings! Up to 36% off on Nail Pullers (in Hand Tools) at Oahu Handyman, Page 2 [113]. Top brands include Laser, meite, UJ Ramelson Co, Hazet, Task Tools, Crimp Supply, Tao tao family, Faithfull, Dead On Tools, Vaughan, & Dalluge. Hurry! Limited time offers. Offers valid only while supplies last.



Laser - 7005 Slide Hamm sizeer Locking Pliers
By Laser
In Stock
$61.44

mpn: 7005, ean: 5018341070052,

4.1 out of 5 stars with 18 reviews
For removing rusty bolts/ nails/cotter pins and dent pullingIdeal for dent pulling, removing corroded components, bolts, nails, cotter pins etc. Includes 1 kilo slide hammer - detachable.


meite NP55 57-100 Psi Pneumatic Professional Heavy Duty Nail Puller/Nail Remover/Punch Nailer
By meite
In Stock
$250.00
$159.00
You Save: 36%

mpn: NP55, ean: 6926857710395,

4.8 out of 5 stars with 17 reviews
About meite meite is a largest professional Penumatic Tools manufacturer in China which includes pneumatic staplers nailerscompressors manual staplers tackers coil-fed screw systems rivet tools a broad assortment of collated nails screws staples specialty fasteners in a variety of materials and finishes and carton-closing staplers. Many of them are industrial grade. Product Description meite NP55 Heavy Duty Pneumatic Professional Punch Nailer / Nail Remover is Ideal for recycling wooden pal


CS Osbourne 3 PIECE SET - Staple Lifter Puller and Spoon Bill Bundle - Upholstery Tools - Perfect for the DIY hobbyist and professional - Made in USA
By UJ Ramelson Co
In Stock
$58.99

mpn: 3BUNDLEnailpullerspoonbill, ean: 0611417769550,

4.8 out of 5 stars with 10 reviews
C.S. Osborne Spoon Bill Staple Puller #1066 - Perfect Hand Tool for Removing Nails and Tacks - Polished Forged Steel Blade. C.S. Osborne #124 Staple Remover - This remover has the correct angle for removing staples of any size, from the smallest to the long leg staples and shredded materials. CS Osborne #120 1/2 Staple Lifter - Electronically hardened working ends are oven tempered to avoid breakage. Made in USA.✅ Essential tool bundle for upholstery fabric removal and repair.. ✅ Heavy duty


Hazet 1787F-20 Quick-clamping puller, 2-arm
By Hazet
In Stock
$147.77

mpn: 1787F-20, ean: 4000896134182,

4.5 out of 5 stars with 11 reviews
Hazet 1787F-20 Quick-clamping puller, 2-arm With quick-clamping device Application: For the quick and safe pulling of ball bearings, pulleys, sprockets etc. Nitrided spindle - extra hard! Maintenance-free - no lubrication necessary To be used as internal and external puller by inversing the hooks New type of quick-clamping allows fast and simple adjusting Very rugged, drop-forged pullers Can be equipped with hydraulic spindle from thread size G 1/2'' Setting scale for even adjusting of puller ho


Task Tools T47025 Mechanical Nail Puller
By Task Tools
In Stock
$41.30
$38.59
You Save: 7%

mpn: T47025, ean: 0062466470254,

4.2 out of 5 stars with 15 reviews
Pry out loooong nails quickly and easily with this mechanical nail puller from Task Tools. The puller lets you pry up longer nails-Inch by-Inch, locking down again for another pry after the first backward pull is maxed out. Great for recycling lumber, re-installation of heavy framework, and more, a comfy handle means no more blisters after hours of prying out the toughest of nails. Carbon steel construction means optimal durability for years of use. Measures 18 -Inch (length).Nail puller for rec


CS Osborne 402 1/2 Combination Furniture Upholstery Tool - Ripping Tack Puller - DIY Made in the USA
By UJ Ramelson Co
In Stock
$25.00

mpn: 4021/2,

4.7 out of 5 stars with 49 reviews
Osborne 402 1/2 Combination Furniture Upholstery Tool Ripping Tack Puller - A beautifully finished tool with a translucent amber handle designed to fit the hand with perfect balance. Forged highly polished steel blade. Shouldered tang to prevent driving into handle. Combined ripping tool and tack puller.✅ Combined ripping tool and tack puller, essential for upholstery work.. ✅ A beautifully finished tool with a translucent amber handle designed to fit the hand with perfect balance.. ✅ Forg


Ideal Medium Safe-T-Grip Fuse Puller (1 per pack)
By Crimp Supply
In Stock
$26.57

mpn: 37A20002,

4.3 out of 5 stars with 7 reviews
Ideal safe-T-grip medium fuse puller. Safely remove or replace industrially, cartridge type fuses. This fully insulated medium fuse puller is constructed of high dielectric glass filled polypropylene. Use on fuses with diameters between 1/2'' to 1''. Rated 0-100 amps and 250 & 600 volts. Fuse puller is 7.5'' long. Notched handles provide non-slip grip and show a clearly marked amperage range.Crimp Supply.


Bearing Hub Gear Puller Set 3 Leg Internal External 3pc Set SIL128
By Tao tao family
In Stock
$61.25

mpn: Ttfus-2648, ean: 6401128473631,

4.3 out of 5 stars with 23 reviews
High quality general purpose puller set for gears, pulleys and hubs etc. Even can be used for flywheels on small engines, found in outboards, lawn mowers etc. Reversible for internal and external use. Fully adjustable design. This listing is for a set of three pullers 3'', 4'' and 6'' (75mm, 100mm, 150mm). Each puller has a long bolt with a pointed tip on one end and a hex grip on the handle for turning by hand or when tight by a spanner or socket. Includes; 1 x 3'' (75mm) three leg puller. 1 x


115mm Aluminium Suction Pad Cup Holder Lifting Glass Lifter Dent Puller 4 Pack
By Tao tao family
In Stock
$65.21

mpn: Ttfus-1629, ean: 6401128463441,

4.3 out of 5 stars with 33 reviews
Professional suction pad for commercial or occasional use Perfect for carrying heavy and awkward items Suitable for carrying sheet materials such as glass and steel Ideal for carrying windows, doors and mirrors Handle operated suction allows for easy attachment and detachment Strong rubber suction mouldings for maximum grip Maximum lifting capacity 50kg Aluminium construction for strength and durability Tighten the two clips to produce suction Heavy duty construction and thick rubber cups Cup di


3pc Diesel Injector Extractor Puller Mercedes CDI Sprinter C & E Class AT977
By Tao tao family
In Stock
$80.40

mpn: Ttfus-2969, ean: 6401128476847,

4.1 out of 5 stars with 53 reviews
Specially designed for the removal of stubborn diesel injectors fitted on Mercedes CDI engines. Features injector cap removal socket, security hex key for removing the inner part of the injector and a puller to remove the injector without damaging the cam cover. This engine type is fitted mainly to CClass, EClass and Sprinter vehicles. Supplied in storage case.professional tools. Save time and improve efficiency. Strong and durable. Delivery within three working days.


46pc Harmonic Puller Set Crankshaft Balance Puller Gear Flywheels Steering TE82
By Tao tao family
In Stock
$58.56

mpn: Ttfus-1247, ean: 6401128459628,

4.3 out of 5 stars with 44 reviews
Use to remove worn or damaged harmonic balancers on all types of vehicles Set Includes 1pc carbon steel yoke 1pc 5'' carbon steel pressure screw 3/4'' 16TPI 2pc small & large centering adapters 1pc flat shaft adapter 3pc 1 1/2'' bolt 3/8'' 24 TPI 3pc 2'' bolt 3/8 '' 16 TPI 3pc 3'' bolt 3/8'' 16 TPI 2pc 4 1/2'' bolt 3/8'' 16 TPI 2pc 6'' bolt 5/16'' 18 TPI 3pc 3 1/2'' bolt 5/6'' 24 TPI 2pc 3'' bolt 5/16'' 24 TPI 2pc 2 1/2'' bolt 1/4'' 28 TPI 3pc 35mm bolt M10 X 1.5mm 3pc 45mm bolt M8 X 1.55mm 2pc


13pc Harmonic Balance/Gear Puller Flywheel Balancer Crankshaft TE324
By Tao tao family
In Stock
$39.17

mpn: Ttfus-968, ean: 6401128456832,

4.0 out of 5 stars with 26 reviews
Useful set with a wide range of uses on cars, machinery etc. Will fit any wheel that the legs can bolt through! Popular for harmonic balances, gears, pulleys, steering wheels and crankshaft pulleys. 13pc kit can be used as a two or three leg puller. Thrust screw has a removable floating swivel. Complete with blow molded storage case. Contents; 1pc 5'' Pressure/Thrust screw. 1pc small centring adapter. 1pc two or three hole puller. 10pc Bolts. (2pc 5/16''x4'', 2pc 1/4''x3'', 3pc 1/4''x2'', 3pc 5/


Car Panel Dent Puller Carrying Cup Small Large (4 pack) Suction Cups TE214/215
By Tao tao family
In Stock
$41.00

mpn: Ttfus-1504, ean: 6401128462192,

4.0 out of 5 stars with 32 reviews
Professional tool for commercial or DIY use Ideal for home, shop, garage or work place. Plastic suction cup ideal for carrying awkward items such as glass, ceramics, GRP etc. Bottom pad size small 2 x 55mm / 2 x large 115mm It has a durable high impact nylon body and a quick release handle Maximum lifting capacity 12KG (small) 35KG (large) (note please be careful when lifting just in case your grip is not properly on and it slips, make sure feet are not underneath carrying item) Pulls reasonable


2PK Aluminium Double Suction Lifter Glass Window Mirror Metal Dent Puller TE344
By Tao tao family
In Stock
$70.09

mpn: Ttfus-1628, ean: 6401128463434,

4.4 out of 5 stars with 13 reviews
Ideal for carry heavy awkward items Ideal for carrying sheet materials such as glass & steel Effective on smooth clean surfaces 115mm suction pads Maximum safe lifting capacity 80kg Aluminium body for strength and durability This listing is for a pack of TWO (one pair)professional tools. Save time and improve efficiency. Strong and durable. Delivery within three working days.


115mm Aluminium Suction Pad Cup Holder Lifting Glass Lifter Dent Puller 2 Pack
By Tao tao family
In Stock
$41.58

mpn: Ttfus-1428, ean: 6401128461430,

4.9 out of 5 stars with 57 reviews
Professional suction pad for commercial or occasional use Perfect for carrying heavy and awkward items Suitable for carrying sheet materials such as glass and steel Ideal for carrying windows, doors and mirrors Handle operated suction allows for easy attachment and detachment Strong rubber suction mouldings for maximum grip Maximum lifting capacity 50kg Aluminium construction for strength and durability Tighten the two clips to produce suction Heavy duty construction and thick rubber cups Cup di


2pk Double Suction Pads Lifter Pad Glass Window Mirror Metal Puller Dent TE286
By Tao tao family
In Stock
$45.06

mpn: Ttfus-1434, ean: 6401128461492,

4.5 out of 5 stars with 11 reviews
Ideal for carry heavy awkward items Ideal for carrying sheet materials such as glass & steel Effective on smooth clean surfaces 115mm suction pads Maximum safe lifting capacity 70kg This listing is for a pairprofessional tools. Save time and improve efficiency. Strong and durable. Delivery within three working days.


Faithfull Nail Puller 600mm (24in)
By Faithfull
In Stock
$29.32

mpn: FAINAILPULL, ean: 5053440320462,

4.4 out of 5 stars with 50 reviews
The nail puller is the perfect tool for removing nails from most materials, lifting floorboards, opening wooden crates and dismantling wooden structuresThis specialist tool can even extract nail heads recessed below surface level. Features a malleable cast iron slide handle with a hinged, drop-forged gripping jaw fixed to a box joint for extra strength. Size: 65 cm (24 in.).


Dead on EX9 10-5/8-Inch Exhumer Nail Puller
By Dead On Tools
In Stock
$26.44
$19.20
You Save: 27%

mpn: EX9, ean: 0787721736868,

4.4 out of 5 stars with 59 reviews
Pull'r Holdings EX9 9'' Dead On Exhumer Nail Puller The E x 9 Death Stick Exhumer is More than a nail puller - Buried the nail in the wrong board? No worries, just dig it up with the Death Stick Exhumer.Pull'r Holdings EX9 9'' Dead On Exhumer Nail Puller Features: S-5 grade steel invest casted Built in saw wrench Built in extractor nail pick Built in bottle opener Limited manufacturer lifetime warranty 9''S-5 Grade Steel Invest Casted. Built-In Saw Wrench. Built-In Extractor Nail Pick. Built-In


Vaughan 470-02 NP12DE Nail Puller, 11-Inch
By Vaughan
In Stock
$26.55
$20.50
You Save: 23%

mpn: 470-02, ean: 0743153377277,

4.6 out of 5 stars with 47 reviews
Vaughan has been designing and manufacturing hammers for over 135 years. Many of what are now accepted as basic hammer designs - from the distinctive curve of the claw to the set of the handle and the shape of the head were introduced by Vaughan. All are the result of Vaughan's commitment to constant hammer improvement and extensive field testing.Designed for extracting deeply imbedded nails. Forged of 5/8'' hex, high carbon steel. Polished claws hardened and tempered for strength and long life.


Dalluge Tools 04250 10" DA Bar Nail Puller
By Dalluge
In Stock
$28.15
$19.50
You Save: 31%

mpn: 04250, ean: 0756655953238,

4.7 out of 5 stars with 15 reviews
Dalluge a tough name in hammers now makes the DA Bar. This tough steel pry bar will give you the leverage you need to pull nails.All Steel Construction. Made In Japan. 90 degree pry end. 15 degree pry end.



Viewing Page 2 of 3

Browse Our Catalog




Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - oahu-handyman.com. All Rights Reserved.