Accessories / Saw Blades, Parts & Accessories - Extreame Savings! Save up to 42%


Extreame Savings! Up to 42% off on Accessories (in Saw Blades, Parts & Accessories) at Oahu Handyman [182]. Top brands include Milescraft, MICRO JIG, DEWALT, POWERTEC, KREG, Makita, BOW Products, Bosch, SawStop, INCRA, Carter, Prazi USA, Evolution Power Tools, DELTA, & Bora. Hurry! Limited time offers. Offers valid only while supplies last.



Milescraft 1407 D/TFeatherBoard Dual or Tandem FeatherBoards for Router Tables and Table or Band Saws
By Milescraft
In Stock
$32.99
$26.69
You Save: 19%

mpn: 1407, ean: 7566908042335,

4.6 out of 5 stars with 23 reviews
The Miles craft Model 1407 D/TFeatherBoard has the dual slide motion and unique pre-load tension design features of the 1406 Feather Board and includes a sturdy spacer for tall stock cutting operations. The D/TFeatherBoard includes two 3/4-Inch and two 5/8-Inch miter bars as well as four T-Slot bolts allowing it to be used as either dual OR tandem feather boards in nearly any application on router tables and table or band saws.An innovative feather board design that provides consistent tension a


GRR-RIP BLOCK Smart Hook Pushblock for Router Table, Jointer, and Band Saws
By MICRO JIG
In Stock
$29.95
$24.95
You Save: 17%

mpn: GB-1, ean: 7241870729544,

4.9 out of 5 stars with 29 reviews
GRR-RIP BLOCK is the smart choice for safety. Harness the ultimate gripping power of the only pushblock with smart heel hooks that know where to grab your workpiece. Smart hooks grab the tail end of the board to give you complete control and confidence to finish the cut. Smart Hooks automatically drop down when you need them, and instantly retract mid-board. They can also be locked into the retracted position. There when you need them – out of the way when you don’t. Nothing is more unnervin


DEWALT Clamp For Tracksaw (DWS5026)
By DEWALT
In Stock
$60.20
$34.99
You Save: 42%

mpn: DWS5026, ean: 0885911085489,

4.3 out of 5 stars with 33 reviews
Black & Decker DWS5026 ClampFor use with track saw cutting system. One-handed operation for fast set-up. For fast, easy set-up. Removable pressure pads.


POWERTEC MT4000 Deluxe Miter Saw Stand with Wheels and 110V Power Outlet
By POWERTEC
In Stock
$123.99

mpn: MT4000, ean: 0736815006264,

4.3 out of 5 stars with 17 reviews
The POWERTEC MT4000 Deluxe Miter Saw Stand with Wheels and 110V Power Outlet is the ultimate portable saw workstation. The stand is constructed with steel tubing and locking steel legs which provides a weight capacity up to 330 lbs. Miter saws, and other bench top saws and planers can be easily secured and removed with quick-dash release universal mounts. Two adjustable steel rollers support your work piece along the stand length smoothly and accurately. Useful flip- down supports for lumber or


DEWALT DW7351 Folding Table for DW735 Planer
By DEWALT
In Stock
$78.04
$46.10
You Save: 41%

mpn: DW7351, ean: 0757073100501,

4.0 out of 5 stars with 26 reviews
The DW7351 13 in. Folding Tables for DW735 Planer are ideal for productivity and performance. Includes: (2) 13 in. Folding Tables for DW735 - DW7351,Hardware Kit. Designed to work with the DW735 planer, the DeWalt DW7351 folding tables are detachable and can be folded for convenience. With lightweight and tough aluminum construction, these 13-inch long tables add length to the planer surface. These tables measure 13 inches long and come with an easy-to-install hardware kit.Productivity. Performa


Kreg KMA2700 Circular Saw Track
By KREG
In Stock
$79.99
$78.95
You Save: 1%

mpn: KMA2700, ean: 0647096807177,

4.7 out of 5 stars with 32 reviews
TRANSFORM YOUR CIRCULAR SAW INTO A HIGH-PERFORMANCE, TRACK-GUIDED CUTTING SYSTEM Start projects right by making straight, accurate, splinter-free cuts with your circular saw and the Accu-Cut Circular Saw Guide Track System. It rips, crosscuts and makes angled cuts up to 48'' long in plywood, MDF, and other large panels with super-simple setup, precise accuracy, and amazing control. The Accu-Cut guides your circular saw along an aluminum track that keeps the saw moving in a straight line easily.


Makita 194368-5 55-Inch Guide Rail
By Makita
In Stock
$74.99

mpn: 194368-5, ean: 5022640940060,

4.0 out of 5 stars with 41 reviews
Makita 194368-5 plunge saw guide rail 55''. Interacts with the saw base to provide smooth perfect dead-on straight or bevel cutting.55'' guide rail to be used with Makita SP6000J/J1 Plunge Saw. Interacts with the saw base and engineered to deliver smooth, dead-on straight or bevel cutting. Also use with select routers and saws using router adapter (194579-2) and saw adapter (196953-0). Ideal for ripping sheet material.


GRR-RIPPER Advanced 3D Pushblock for Table Saw, Router Table, Jointer, and Band Saw by MICROJIG
By MICRO JIG
In Stock
$79.95
$78.90
You Save: 1%

mpn: GR-200, ean: 0815267010019,

4.6 out of 5 stars with 51 reviews
GRR-RIPPER Advanced 3D Push block is the ultimate in safety, precision, and control. A must-have for any table saw user. Essential for protection against injury, virtually eliminating kickback, and controlling your work piece large and small accurately. Guide and rip along the rip fence using the powerful gripping non-slip surface to control the stock through the cutters. Rips down to 1/4'' standard without readjusting the fence. The Adjustable Center Leg accommodates for a variety of sizes and


BOW Products GuidePRO Featherboard
By BOW Products
In Stock
$79.99

mpn: GP5, ean: 0853223006270,

4.4 out of 5 stars with 19 reviews
The BOW Products GuidePRO Featherboard is an easy-to-install guide that offers users a hands-free solution to getting the best performance from their bandsaw. With three simple steps, the user can gain a smoother infeed, ensure consistent pressure, reduce vibration, and deliver the perfect cut every time. The new STANDARD for bandsaw cutting. The GuidePRO applies consistent pressure along the leading edge of the work piece, ensuring even contact between the work piece and saw fence for a truly s


Bosch TS2100 Gravity-Rise Table Saw Stand
By Bosch
In Stock
$199.99

mpn: TS2100, ean: 0000346463866,

4.8 out of 5 stars with 18 reviews
Take the back-ache out of setting up and breaking down your table saw with the revolutionary new Gravity-Rise wheeled saw stand from Bosch. Designed for general contractors, trim carpenters, woodworkers and remodeler, the Bosch TS2000 gravity-rise stand is a rugged, portable, and, best of all, easy-to-use. Setup is a snap! Simply turn the release lever, put your hand on the tabletop and the stand raises and lowers relative to your hand pressure so that you can find just the right height for your


SawStop RT-DCB Downdraft Dust Collection Box for Router Lift
By SawStop
In Stock
$139.00

mpn: RT-DCB, ean: 0857555005390,

4.8 out of 5 stars with 18 reviews
Engineered to draw the dust down from the router bit and deliver to a 4'' port for Collection, all while substantially minimizing router noise, this steel Collection box features interchangable panels for optimum dust port and Vent placement. Plug the 2.25'' dust hose from the router fence directly into the dust box's branch inlet, and let the 4'' port deliver above and below Table dust from the same port.Collects below-table dust. Connects to 4'' dust tube. Compatible with all SawStop Router ta


SawStop TSI-SLD Standard Lock Down Insert
By SawStop
In Stock
$49.00

mpn: TSI-SLD, ean: 0732454690598,

4.0 out of 5 stars with 10 reviews
This insert can be used with all SawStop Cast-Iron saws (Jobsite Saw not included) using standard 10'' saw blades. Precision machined from a high-quality, ultra strong phenolic core material that is covered on top and bottom with a low-friction, wear-resistant melamine surface. The positioning screws ensure a solid and precise fit in the table. This unit comes with preformed clearance slots for SawStop blade guard and riving knife and has dual metal wear plates for antikickback pawls. The positi


INCRA MiterV120 Miter Gauge
By INCRA
In Stock
$84.95
$76.90
You Save: 9%

mpn: MITERV120, ean: 0733353061878,

4.4 out of 5 stars with 42 reviews
The Miter V120 from INCRA has the precision of a higher price-point miter gauge while offering a price that makes it an affordable upgrade to your stock miter gauge. 120 AngleLOCK Indexing Stops. 1 Degree Stop Spacing with Special Stops at +/- 22-1/2 degrees. Patented GlideLOCK Miter Bar Expansion Disks Provide a perfect fit. Removable retaining clip for T-Slot miter channels. All steel machined and laser cut components.120 Angle LOCK Indexing Stops. 1 Degree Stop Spacing with Special Stops at


CARTER MAGFENCE II Universal Magnetic Fence
By Carter
In Stock
$113.67

mpn: MFII, ean: 0688937511440,

4.0 out of 5 stars with 30 reviews
The Carter Products MAGFENCE II magnetic fence attaches to most steel or cast-iron tables, regardless of size, quickly and easily because there are no brackets or mounts required for attachment. Perfect for use with your bandsaw, drill press, spindle sander; nearly any tool with a ferrous metal surface.Attaches magnetically for universal fit on most ferrous metal tables. 16'' long, 3-1/2'' tall L-shaped aluminum extrusion with multiple T-slots. Two powerful, switchable magnets for quick, precise


POWERTEC 71387 55" Guide Rail Joining Set | Includes (2) Aluminum Extruded Guided Rails and (2) Guide Rail Connectors for Woodworking Projects | Compatible with Makita or Festool Track Saws
By POWERTEC
In Stock
$129.99

mpn: 71387, ean: 0843441104049,

4.3 out of 5 stars with 42 reviews
Introducing the Guide Rail and Connector Set by POWERTEC.This hard to find, all-in-one kit features a convenient combo of high quality guide rails and compatible connectors.  A terrific value, this exclusive set provides you with a dependable guide rail system for optimized track saw cutting operations.  The included tracks will help align your saw for precision cuts, delivering professional results.  Each track acts as an optimizer, providing consistency and impressively accurate results, wh


Prazi USA PR2700 Beam Cutter Non Worm Drive
By Prazi USA
In Stock
$159.00
$148.95
You Save: 6%

mpn: PR2700, ean: 0736944027000,

4.4 out of 5 stars with 44 reviews
The prazi PR-2700 beam cutter (for 7 1/4'' Non worm drive Circular saws) cuts angles up to 45 degrees. The vertical foot-plate and built-in sight allow smooth, exact square cuts and ensures gliding manageability while cutting perfectly straight lines. With a 12 in. Cutting capacity, you can professionally execute the following cuts and many more: rafter pitch cut, miters, stairs, arches, log cuts, compound angles, bandsaw cut, notch 6x12 panels and ripping. Quick & easy installation - 60 second


Evolution Power Tools EVOMS1 Compact Folding Miter Saw Stand with Quick Release Mounting Brackets, Rollers, and End Stops, Black
By Evolution Power Tools
In Stock
$98.22

mpn: 005-0001, ean: 5054242019998,

4.3 out of 5 stars with 19 reviews
This miter saw stand is a fantastic addition to Evolution’s product range. Perfectly complementing Evolution’s miter saws, as well as most other brands of miter saw. Setup and take down of the miter stand is quick and easy. This miter saw stand is both lightweight and robust. The stand weighs just 34lb and can support long workpieces, up to 118in, in length and can support up to 330lb. It is equipped with quick release mounting brackets for fast saw removal and height adjustable arms, with r


DELTA Deluxe Miter Gauge
By DELTA
In Stock
$61.20
$39.99
You Save: 35%

mpn: 34-929, ean: 0847962005199,

4.3 out of 5 stars with 25 reviews
Genuine Original Equipment Manufacturer (OEM) parts! This miter gauge assembly (part number 34-929) is for table saws. Miter gauge assembly 34-929 guides the work piece as it's being cut. The assembly may include multiple parts; refer to your parts diagram for a complete list of parts included. Follow the instructions in the owner's manual when installing this part. For Delta.This part is compatible with models including; 34-710,34-440 (90C12580 THRU 95H98459),34-440 (88J00000),34-440 (95H98460


Bora WTX Clamp Edge and Straight Cut Guide for Circular Saws | 100 Inch Cutting Length (50" clamp edge + 50" extension)
By Bora
In Stock
$119.99
$79.30
You Save: 34%

mpn: 543100, ean: 0785497890258,

4.1 out of 5 stars with 25 reviews
Get it straight on the first cut! This 100 in Clamp Edge Guide from Bora is a must-have saw accessory. Made of heavy-duty aluminum it serves as a rigid track guide while keeping your cutting in line. Stick it in your tool kit or on your workbench table for professional, precise cuts each and every time your saw rips through the wood.GET IT STRAIGHT - This rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. Its long 100 inch length allows you to saw with precisio


Makita 199140-0 39" Guide Rail
By Makita
In Stock
$44.95

mpn: 199140-0, ean: 0088381528672,

4.4 out of 5 stars with 12 reviews
The Makita 39'' Plunge Saw Guide Rail (199140-0), when used with a Makita Plunge Circular Saw (SP6000) is a more portable option to a table saw for ripping sheet material. The Guide Rail interacts with the Plunge Saw (not included) to provide smooth, dead-on straight cuts. For use with the Makita 6-1/2 in. Plunge Circular Saws (models SP6000K/K1 and SP6000J/J1).For use with Makita Plunge Saw models XPS01, XPS02, and SP6000J. Plunge saw base connects directly to guide rail to deliver smooth, dead



Viewing Page 1 of 3



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - oahu-handyman.com. All Rights Reserved.