Accessories / Lathe Parts & Accessories - Blowout Sale! Save up to 55%


Blowout Sale! Up to 55% off on Accessories (in Lathe Parts & Accessories) at Oahu Handyman [216]. Top brands include PSI Woodworking, Hurricane Turning Tools, Easy Wood Tools, F-ber, JL-BRAND, Nova, Jacobs, Lathe Centers, ONESTEP-TOOLS, Teknatool, Peachtree Woodworking Supply, & Z LIVE CENTER. Hurry! Limited time offers. Offers valid only while supplies last.



PSI Woodworking LSR3 Wood Lathe Steady Rest
By PSI Woodworking
In Stock
$54.95

mpn: LSR3, ean: 0718122016105,

4.4 out of 5 stars with 11 reviews
Turn and support your long slender spindles while eliminating bowing and vibration. The Stead-Fast Steady Rest adapts to any split bed midi-lathe for ultimate control of those delicate spindles when you need it.Fully adjustable wheels easily adapt to any position or spindle diameter down to 1/2''.. 3-point ball bearing spindle support.. Non marring soft wheels.. Mounts in the channel of any split bed or double rail lathe.. Compatible with Jet, Delta, and Turncrafter Pro Midi lathes with extensio


PSI Woodworking PKMS1SET Pen Mandrel Saver Package #1MT,
By PSI Woodworking
In Stock
$42.80
$29.95
You Save: 30%

mpn: PKMS1SET, ean: 0743031896654,

4.9 out of 5 stars with 51 reviews
This pen Mandrel package includes a 7mm drill bit, (5) 7mm bushings, #1MT Mandrel saver Tailstock center, and a #1MT basic Mandrel (No threads or knurled nut). are you tired of bending your Mandrel and ruining the point on your live center? if so, then this package is for you. Mandrels usually bend when you tighten the Tailstock center point into the end indentation of your Mandrel. This system solves that problem because your Mandrel shaft goes through the hollow live center. Your bushings Pres


PSI Woodworking CJAWFJ2 Jumbo Flat Jaws
By PSI Woodworking
In Stock
$34.95

mpn: CJAWFJ2, ean: 0689076541992,

4.0 out of 5 stars with 27 reviews
8'' flat jaws used for finishing bowl bottoms when attached to a Barracuda scroll chuck. The Jaws open to accommodate an 8-inch bowl. Includes : 8 - 1/2'' and 8 - 3/4'' rubber bumper pegs (16 total) to securely hold your bowl in position. It is easy to adjust sizes with the 4-position peg system. Compatible with Barracuda ''C'' style chucks including: CMG3C, CSC2000C, CSC3000C, CSC3000CTN. Weighs 4 pounds shipped.Scroll lathe chuck designed for finishing bowl bottoms. Jaws open to accommodate an


Hurricane Turning Tools, Pen Mandrel Bundle with Mandrel Saver, 2MT
By Hurricane Turning Tools
In Stock
$33.99

mpn: HTT-ACC-PMBS-2MT, ean: 0846817043232,

4.1 out of 5 stars with 41 reviews
Hurricane Standard Series Pen Mandrel with Mandrel Saver. This set includes a 7 mm Pen Mandrel, 5 bushings and the Mandrel Saver Tailstock Center.Features:Set includes a 7 mm Pen Mandrel, 5 spacer bushings and the Mandrel Saver Tailstock CenterHeadstock Mount: #2 MT (Morse Taper)Material: SteelHurricane Turning Tools is a premium brand of tools and accessories meeting the needs of woodturners and woodworkers. Hurricane Tools include woodturning tools, wood lathe chucks and jaws, drill bits and H


PSI Woodworking LCTEN HSS Wood Lathe Tenon Tool
By PSI Woodworking
In Stock
$16.95

mpn: LCTEN, ean: 0689076541794,

4.9 out of 5 stars with 8 reviews
High Speed Tenon Tool # LCTEN. Only 1/16'' thick! Get a clean, sharp and accurate 90 degree inside angle corner for delicate turnings. A must tool for any pen maker for cutting perfect tenons on pen center bands. The blade is 1-1/4'' wide and 5'' long with a 4'' wood handle.HSS wood lathe tenon tool. Get a clean, sharp and accurate 90 degree angle corner for delicate turnings. A must tool for any pen maker. For cutting perfect tenons on pen center bands. Measures 1/16 inches wide.


Easy Wood Tools Ci3 Round Negative Rake Carbide Cutter
By Easy Wood Tools
In Stock
$18.99
$17.09
You Save: 10%

mpn: 6400NR, ean: 0811269020957,

4.4 out of 5 stars with 13 reviews
Easy Wood Tools Carbide Cutters not only greatly reduce chipping and catches, they leave an ultra-smooth finish. Easy Wood Tools has done it again, designing the first carbide cutters intended specifically for turning man-made materials such as resins and acrylics, as well as super dense hardwoods. This Ci3 Round Negative Rake Carbide Cutter is designed to fit existing Easy Wood Tools with corresponding Ci3 bar, Easy Start Finisher, Mini Easy Finisher, and Mid-Size Easy Finisher.Designed specifi


Trolleyshop New Led Beep Touch Point Sensor Precision Locate Working Electronic Optical Edge Finder CNC Lathe Machine Machinist Mill w/Original Box
By F-ber
In Stock
$20.98

mpn: 43237-2,

4.6 out of 5 stars with 10 reviews
Description: Features:Accuracy 0.005MMQuickly locate work edgesProbe Hardened & Precision GroundNot necessary to rotate while measuringLED lights instantly and it beeps when probe touches conductive work pieceThere is a safety spring puller which puts The ball precisely back to the position when ball breaks away from ball seatThese excellent tools quickly locate work edges and save time when finding positions on milling machines, jig borers etc etcThey employ a highly sensitive location sensor


JL-BRAND Thread Chuck Insert/Adaptor female 1 inch 8 TPI male 1-1/2-8 TPI for Ref - IDNS - 101234 (1-Inch 8TPI) for NOVA lathe chuck
By JL-BRAND
In Stock
$16.99

mpn: IDN, ean: 0610521998382,

4.8 out of 5 stars with 33 reviews
The insert's external thread fits into the back of the chuck. The internal thread matches that of your lathe's headstock spindle. 60 Days Money Back Guarantee - No question asked!! - Got ANY Problem ? Msg seller to get full REFUND!!!!Adapts any insert type NOVA chuck to almost any lathe spindle at a very low cost 101234 (1-Inch 8TPI). Easy and inexpensive insert/adapter system on all NOVA chucks ,Simply screws into the back of your NOVA chucks. female 1 inch 8 TPI,male 1-1/2-8 TPI,Make sure the


NOVA 71010 Keyed Chuck 2MT
By Nova
In Stock
$39.99

mpn: 71010, ean: 0669762710109,

4.2 out of 5 stars with 40 reviews
Perfect drill chuck accessory for NOVA lathes, or any Lathe or drill press with a 2MT spindle.Can hold .166''/1.58mm to .5''/12.7mm. Can be used for grabbing small turning or pen mandrels on the headstock. Use with a drill bit in the tailstock of your Lathe.. Use with NOVA Voyager drill press or other drill presses..


Jacobs Chuck 30354 3/8-Inch Keyless Chuck for 3/8-Inch 24 Thread Spindle
By Jacobs
In Stock
$39.19
$17.75
You Save: 55%

mpn: 30354, ean: 0787721826453,

4.0 out of 5 stars with 32 reviews
Split bite jaw: increases grip over standard bite chucks by providing more contact with the bit., superior gripping force: provides high Mechanical advantage to convert hand tightening torque into superior bit gripping force., hammer Lock mechanism: positive locking mechanism prevents loosening in Hammer and other high vibration applications., Anti-Lock nut: prevents chuck from locking open., versatility: models available to fit all 10mm (3/8”) and 13mm (1/2”) variable speed corded and cordl


Authentic Easy Wood Tools Ci2-SQ Square Carbide Replacement Cutter for Easy Start, Mini and Mid Midi Roughers Lathe Woodturning Tools Ci2-SQ
By Easy Wood Tools
In Stock
$13.99
$12.59
You Save: 10%

mpn: 2500, ean: 0811269020537,

4.9 out of 5 stars with 21 reviews
This is a Authentic made in the USA Easy Wood Tools Ci2-SQ square carbide cutter designed to fit the Mid, Mini and Easy Start Easy Wood Roughers. Beware of cheap imitations of Easy Wood Tools carbide cutters. Authentic EWT cutters have the optimal 3G's of Carbide - Grade, Grind, and Geometry. 1) The Right Grade: Carbide is basically a mixture of tungsten powder and cobalt that is fused together under high pressure and heat. The ratio of cobalt to tungsten and the size of the tungsten particle ar


Authentic Easy Wood Tools Ci2-R2 Carbide Replacement Cutter with 2" Radius for Easy Start, Mini and Mid Midi Roughers Lathe Woodturning Tools Ci2-R2
By Easy Wood Tools
In Stock
$14.99
$13.49
You Save: 10%

mpn: 2600, ean: 0811269020728,

4.2 out of 5 stars with 34 reviews
This is a Authentic made in the USA Easy Wood Tools (EWT) Ci2-R2 square carbide cutter with a 2'' radius designed to fit the Mid, Mini and Easy Start Easy Wood Roughers. Beware of cheap imitations of Easy Wood Tools carbide cutters. Authentic EWT cutters have the optimal 3G's of Carbide - Grade, Grind, and Geometry. 1) The Right Grade: Carbide is basically a mixture of tungsten powder and cobalt that is fused together under high pressure and heat. The ratio of cobalt to tungsten and the size of


LC-31 3 Morse Taper Medium Duty Live Center
By Lathe Centers
In Stock
$25.32

mpn: LC-31, ean: 0784497020672,

4.6 out of 5 stars with 35 reviews
Medium duty live center for general machine shop use.3 Morse Taper Shank. Centers have 60 degree point.. Made of finest heat treated steel, with case-hardened housing.. Maximum runout of .0008''. Built-in washer to protect bearings from grit and dust..


KNURLING TOOL HOLDER-ADJUSTABLE-SPRING-with 6pcs wheel
By ONESTEP-TOOLS
In Stock
$36.97

mpn: 11-0033, ean: 0763230011092,

4.2 out of 5 stars with 59 reviews
Specifically for the mini lathe ,Capacity: 0 to 2'' diameter.Size of holder: 4''x1/2x1/2. The knurling has a capacity of 0 to 2''(50mm) diameter. Include 3 pairs knurling wheels: 0.8mm, 1.2mm,1.8mm. Fits standard 4-way and quick change tool posts. Requires snap ring pliers to change wheels.


PSI Woodworking LCENT3210 Super 4-Prong Spring-Loaded Drive Center #2MT
By PSI Woodworking
In Stock
$18.68

mpn: LCENT3210, ean: 0718122015306,

4.4 out of 5 stars with 35 reviews
The sharp spurs on this drive center give a strong bite into wood. The drive center features a spring-loaded center point that simplifies positioning your spindle and retracts to avoid splitting your work when Tailstock pressure is applied. 1'' Diameter. #2 MT.1'' Diameter with #2MT. Sharp spurs give a strong bite into wood work piece. Spring-loaded center point simplifies positioning of your spindle. Spring-loaded center point retracts when tailstock pressure is applied. Spring-loaded center po


PSI Woodworking CLTEZSETC EZ-Glide Bowl Turner's 4Piece Toolrest Set
By PSI Woodworking
In Stock
$45.48

mpn: CLTEZSETC, ean: 0718122574391,

4.5 out of 5 stars with 15 reviews
Reach far into the interior of bowls with ease with these 4 invaluable tool rests. Use for bowl exterior, Interior hollowing, deep penetration, and sharp corners. The ultra smooth, round hardened steel rod top will let you effortlessly glide your Lathe tool for superior results. The upper support rod will not nick or scratch. Post on all 4 tool rests is 5/8'' Diameter. S-curved tool rest has 11'' Span with 3'' Long post with overall vertical length of 4''. 1-1/2'' Radius J-curved tool rest has 8


Teknatool - Nova G3 30th Anniversary Woodturning Chuck Bundle
By Teknatool
In Stock
$183.99
$134.89
You Save: 27%

mpn: 48246, ean: 0669762482464,

4.0 out of 5 stars with 23 reviews
Teknatool has included additional jaws and added two newfeatures to create this 30th Anniversary G3 Chuck Bundle.  A new Reverse Lock enables the NOVA G3 chuckto be locked securely onto the lathe spindle when using the forward and reversefunctions. The four jaw, self-centering, geared NOVA G3 also has a newdedicated 1'' 8 TPI thread and can be used with any lathe that fits thosespecifications. Powerful Tuff Lock gearing with precise, hardened actiondelivers incredibly smooth strength for a soli


PSI Woodworking CUG3418CC Utility Grip 4 Jaw Lathe Chuck System
By PSI Woodworking
In Stock
$101.90
$87.95
You Save: 14%

mpn: CUG3418CC, ean: 0718122016303,

4.6 out of 5 stars with 59 reviews
Heavy duty chrome-plated self-centering chuck will hold your work tight and secure on midi and full size woodworking lathes. Holds spindles and bowl blanks from the inside or outside. Chuck is pre-threaded to 1'' x 8tpi. Includes 3/4'' x 16tpi adaptor. Includes #1 Step Jaws 3/32'' to 1-7/8'' External & 11/32'' to 3-3/8'' Internal. Includes #2 Round Jaws 1-1/2'' to 3-1/8'' External & 2'' to 3-7/8'' Internal. Includes Screw Chuck. Also includes an Allen Wrench and a set of Tightening Levers. Weigh


Pen Blank Centering Vise For Drilling Center Holes in Pen Blanks Using a Drill Press
By Peachtree Woodworking Supply
In Stock
$43.99

mpn: 7003, ean: 0814310010211,

4.1 out of 5 stars with 58 reviews
Easily locate and drill pen blank centers and Drill through the exact center of your pen blanks with this simple but effective Pen Centering vise. By far one of the best selling pen vises available, this jig will be a go to tool when turning your pens. The jaws on the drilling center move in and out simultaneously to insure precision center drilling of your blanks each and every time you use the vise. Just set up the vise once and drill all of your blanks in the exact center. There is no need to


3/16"- 3/4" Heavy Duty Drill Chuck with 2MT Arbor In Prime Quality (Morse Taper No.2)
By Z LIVE CENTER
In Stock
$47.95

mpn: 09801B-20MM-2MT, ean: 0737452110512,

4.7 out of 5 stars with 37 reviews
Heavy duty design. Special quenching treated key parts increases durability. Suitable for drill presses or lathes spindle accepts 2MT shank. Jaws are specially engineered to achieve balance. JT3 mounted. Chuck key and MT2-JT3 arbor are also included in the package.Clamping Range: 3/16'' - 3/4''. (PLEASE NOTE THE DRAWS DO NOT CLOSE ENTIRELY TO ZERO RATHER IT CLOSE TO 3/16''). Chuck Overall Length: 4.33''. Shank Diameter: 2.57''; Shank Size: 2MT (Morse Taper #2) PLEASE NOTE THE TAPER IS MT2 (SPIND



Viewing Page 1 of 3



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - oahu-handyman.com. All Rights Reserved.