Accessories / Lathe Parts & Accessories - Page 2 - On Sale Now! Save up to 10%


On Sale! Up to 10% off on Accessories (in Lathe Parts & Accessories) at Oahu Handyman, Page 2 [216]. Top brands include Hurricane Turning Tools, PSI Woodworking, DELTA, Nova, Teknatool, Jacobs, Maxwood, ZEHONG, All Industrial, Beall Tools, FomaSP, Hold Fast, Easy Wood Tools, & vector tools. Hurry! Limited time offers. Offers valid only while supplies last.



Hurricane Turning Tools, Lathe Pen Mandrel with Sliding 7mm Shaft, 2MT
By Hurricane Turning Tools
In Stock
$29.99

mpn: HTT-ACC-PMSS-2MT, ean: 0846817043256,

4.3 out of 5 stars with 50 reviews
Hurricane Standard Series Pen Mandrel with collet mount accepts a sliding 7mm shaft. This mandrel includes a 7mm mandrel shaft that slides through a headstock collet. The collet clamps down tightly on the mandrel shaft with two wrenches (not included).Features:7 mm Pen Mandrel with collet mountAdjustable shaft length eliminates wobble and flexingIncludes 5 slimline bushingsHeadstock Mount: #2 MT (Morse Taper)Material: SteelHurricane Turning Tools is a premium brand of tools and accessories meeti


PSI Woodworking CSCPENCHK2 Large Dedicated Pen Blank Drilling Chuck
By PSI Woodworking
In Stock
$108.90
$99.95
You Save: 8%

mpn: CSCPENCHK2, ean: 0721782102675,

4.4 out of 5 stars with 25 reviews
With two and a half times the capacity of our Original Dedicated Pen Blank Drilling Chuck (CSCPENCHK), this large capacity chuck will let you drill bottle stopper blanks, project handles, and much more. The chuck features a reversible set of jaws that enables drilling blanks up to 2-1/2'' square and 5'' long. Use the standard jaw position to drill from 1/4'' to 1-1/2''. Reverse the jaws to drill from 1-1/2'' to 2-1/2''. Weighs 2.35 lbs with 3.25'' diameter. Pre-threaded to 1'' x 8tpi. Includes a


Delta Industrial 46-463 Modular Midi-Lathe Bed Extension
By DELTA
In Stock
$139.99

mpn: 46-463, ean: 0847962000064,

4.2 out of 5 stars with 43 reviews
Includes Midi-Lathe Bed Extension - 46-463.Midi-Lathe bed extension adds an additional 25-1/2-inch of length between centers to accommodate longer turning applications. Modular design allows you to connect multiple extensions. 1 extension = 42-inch of length between centers. 2 extensions = 67-1/2-inch of length between centers. DELTA recommends the use of no more than 2 extensions total.


NOVA 71028 Precision Midi
By Nova
In Stock
$88.97

mpn: 71028, ean: 0669762710284,

4.4 out of 5 stars with 21 reviews
This 4-Jaw self-centering chuck minimizes loads on small Lathe spindles and bearings. This small chuck is suitable for smaller wood lathes with up to 12″ swing. The NOVA precision Midi chuck is packed with unique features such as auto stop, copper composite jaw slides, woodworm screw, and 2″ jaws as standard. The Quick two handle operation makes it ideal for fast turning of smaller pieces. Takes the same accessory range As other NOVA chucks. The NOVA precision Midi is directly threaded for u


12" Nova Cole Jaws with Extenders to 15" and HD workholding kit (Nova 6040, 6039, 6030)
By Teknatool
In Stock
$139.95

mpn: 6040-6039-6030, ean: 0725410806249,

4.9 out of 5 stars with 28 reviews
The Nova 12'' Cole jaws are a very versatile set designed primarily for the re-chucking of bowls to remove chuck marks or to re-shape the bottom of bowls that have already been turned. This package includes the 12-15'' adaptors for very large bowls (for lathes 16'' swing or larger only). There is also provision to mount the 50mm, Step, and 100mm jaws onto the Cole jaws which enhances their use considerably. All the facilities of the other jaw sets can be fully utilised in conjunction with the Co


Nova 48202 G3 Wood Turning Chuck Insert Type
By Nova
In Stock
$102.99

mpn: 48202, ean: 0669762482013,

4.6 out of 5 stars with 19 reviews
IMPORTANT NOTICE Safety Advisory! Only use authentic NOVA accessories on your NOVA chuck. Using non genuine NOVA and copies of accessories could lead to operation and safety issues and will void our market leading warranty. NOVA accessories are designed for use only on NOVA Chucks. Do not use on any other chuck.High powered Tuff Lock gearing delivers outstanding grip for little effort. Fast comfortable T Bar handle. Open back for easy cleaning. Fits full range of NOVA Chuck Accessories. Special


Jacobs 1/2" Drill Chuck 1/16-1/2" Capacity with R8 Shank & KK Key Bridgeport Lathe Tool
By Jacobs
In Stock
$79.95

ean: 0600292921856,

4.7 out of 5 stars with 22 reviews
This industrial quality light duty threaded mount professional key type plain bearing drill chuck with fully hardened and ground working components offers exceptionally high accuracy, gripping power and durability on all types of industrial power and machine tools Jaws center-ground for absolute straightness and alignment One-piece sleeve design eliminates cracks between driving teeth Sleeve teeth, nose piece and keyholes are through hardened, providing outstanding wear resistance Smooth and


6" Steel Wood Lathe Face Plate, 1-1/4" x 8tpi Threaded
By Maxwood
In Stock
$34.99

mpn: 5114, ean: 0725410807031,

4.7 out of 5 stars with 27 reviews
This is a well made, heavy faceplate. At 7/16'' thick, it is rigid and well balanced.7/16'' Thick Steel Faceplate - Heavy and Rigid, 1-1/4'' Thread Depth. 8 Offset Screwholes on 2 guide rings for easy centering. Locking set screw for use on reversing lathes. Flat spots cut on back spigot for easy removal from lathe. Some Powermatic & Laguana lathes may require Maxwood 5144 spacer behind this faceplate (extra long spindle on these).


Three-Jaw Chuck,Clamping Diameter 1.8~56mm / 12~65mm,tread hole is M12X1, Z011 for mini lathe
By ZEHONG
In Stock
$32.00

mpn: Z011, ean: 0730440406840,

4.4 out of 5 stars with 12 reviews
the tread hole is M12*1Three-Jaw Chuck,Clamping Diameter 1.8~56mm / 12~65mm, Z011 for mini lathe Clamping Diameter : 1.8~56mm / 12~65mm The thread : M12*1 Product material: aluminum alloyThree-Jaw Chuck,Clamping Diameter 1.8~56mm / 12~65mm, Z011 for mini lathe. Precise and reliable. Using efficient courier delivery..


Teknatool - Nova G3 30th Anniversary Woodturning Chuck Bundle With Added 6006 8" Cole Jaw Set (Chuck direct threaded to 1" x 8tpi)
By Teknatool
In Stock
$199.95

mpn: 48202D, ean: 0669762482761,

4.6 out of 5 stars with 17 reviews
Anti-release spindle lock - Reversible (locks to lathe spindle with set screw) Ensures chuck will stay securely mounted on the lathe during forward and reverse turning applications One handed geared action; powerful and positive grip. Small size (85mm/3.35'') and weight minimizes load on small spindles and bearings. Takes the same accessory range as all other NOVA chucks.* Direct Thread 1'' x 8TPI dual thread Fast operating action - ideal for production turning of smaller pieces Advanced feature


AXA Piston Tool Post Set CNC High Precision Quick Change Lathe Holder 100 Series
By All Industrial
In Stock
$140.58

mpn: 951-1100, ean: 0647829664220,

4.7 out of 5 stars with 53 reviews
AXA Piston Tool Post Set CNC High Precision Quick Change Lathe Holder 100 Series. For use on lathes with up to 12'' swing (diameter that can be turned over the bed). Precision-engineered to assure repetitive accuracy. Quickly & easily install on an engine, bench, or turret lathe.Our Part # ALL-47125. Slash Your Setup Time- instant changing from one operation to another! Fully interchangeable with Aloris, Dorian, Phase II, Yuasa, and most other manufacturer components (AXA or 100 Series only). Al


Beall Wood Buff System
By Beall Tools
In Stock
$83.99

mpn: WB WB,

4.1 out of 5 stars with 38 reviews
Give your next small project a spectacular finish quickly and easily with this set of three 8'' diameter buffs, compounds, and a quick-change adapter. Give your next small project a spectacular finish quickly and easily with this set of three 8'' diameter buffs, compounds and a quick-change adapter. Whether youre polishing an oil finish on a box, buffing the scratches out of a turned bowl or platter, or finishing pen blanks, this system will leave a glass smooth surface on whatever you hold to i


FomaSP 8.9mm Round Carbide Cutter Insert (8.9mmX1.85mm) for Wood Turning Tool,10pcs
By FomaSP
In Stock
$29.99

mpn: I-RD-809-10, ean: 0765951324161,

4.0 out of 5 stars with 44 reviews
Sise: Dia:Diameter approximately 8.9mm thickness 1.85mm with a .178'' dia. countersunk mounting hole at std. 82 degrees. Grade for Wood Machning: Grade:LCR08 Hardness:93.5 Transverse Rupture Strength:3600 Grain Size:UltrafineSTANDARD SIZE:8.9mm(Diameter) X1.85mm(Thick)-82°(Cutting angle). Round carbide cutter inserts with circular cutting edge and the reasonable cutting angle make the cutting safer and cleaner,fit for wood finishing. INDUSTRIAL QUALITY:Made of solid tungsten carbide,hard an


NOVA 5015 Live Center System with Stepped Cone
By Nova
In Stock
$72.82

mpn: 5015, ean: 9417609002716,

4.2 out of 5 stars with 45 reviews
This precision machined live center features a triple bearing construction for heavy duty use and long life. Hollow center design makes it capable of accepting a 5/16'' shell Auger for lamp stand boring. Threaded center has a 5/16'' bolt so it can act as an arbor to mount a variety of projects and a miniature reverse cone function to centerless mount miniature round turnings (e.g. lace bobbins) up to 12mm (0.47''). All separate centers that fit into the Nova Live Center have a 2MT taper so the


Hold Fast Chuck Reversing Adapter 1-1/4" x 8 TPI - #2 Morse Taper
By Hold Fast
In Stock
$34.95

mpn: A874, ean: 0830314008740,

4.4 out of 5 stars with 51 reviews
This chuck reversing adapter features a #2MT on one end to fit into your tailstock and threaded on the opposite end to screw into your chuck. Unscrew your chuck off the lathe headstock without removing your bowl, screw the reversing adapter into the chuck and install the bowl-chuck-adapter into your tailstock. By sliding the tailstock up the bed until the bowl touches the vacuum head you can perfectly center your bowl on the vacuum head to finish turning perfectly centered.#2 Morse taper. 1-1/4'


Easy Wood Tools 3 1/2" Diameter x 1-1/4" x 8 TPI Precision CNC Machined Anodized Aluminum Faceplate with Set Screws, 8 Large Mounting Screw Holes, Spanner Hole F635
By Easy Wood Tools
In Stock
$29.99
$26.99
You Save: 10%

mpn: F9635, ean: 0811269020148,

4.7 out of 5 stars with 32 reviews
This 3 1/2'' diameter x 1-1/14'' x 8 TPI Easy Wood Tool precision CNC machined anodized aluminum faceplate can be screwed to bowl blanks then securely mounted on the lathe. This faceplate will meet the needs of the most demanding wood turner. CNC precision machined from solid aluminum and then anodized, it will never rust or transfer stains when turning green wood. The aluminum body will greatly minimize tool damage if accidently contacted. Lower profile (1/2'' thick plate) will keep work close


NOVA JS130N 130mm Chuck Accessory Jaw Set
By Nova
In Stock
$64.99
$59.99
You Save: 8%

mpn: JS130N, ean: 0669762000187,

4.2 out of 5 stars with 25 reviews
IMPORTANT NOTICE Safety Advisory! Only use authentic NOVA accessories on your NOVA chuck. Using non genuine NOVA and copies of accessories could lead to operation and safety issues and will void our market leading warranty. NOVA accessories are designed for use only on NOVA Chucks. Do not use on any other chuck.Designed for expanded dovetail, reverse dovetail for gripping footed bowls. Perfect for larger bowls, up to 29-Inch in diameter. Same jaw fixing system across all NOVA Chuck models - tot


MINI METAL LATHE TAIL STOCK DRILL CHUCK TOOL WITH MT2 MORSE TAPER ARBOR MT 2
By vector tools
In Stock
$27.95

ean: 0643845645007,

4.9 out of 5 stars with 23 reviews
Attach this lathe chuck to the tail stock of the 7'' x 10'' precision mini lathe for all drilling applications. The lathe chuck won't slip and is ideal for hobby work and light duty work in the shop or garage. Capacity: 5/64'' to 1/2'' Mounting holes: Jacobs taper #33 Mandrel taper: MT2 Mandrel material: 1010 low carbon steel Shank length: 3 1/8'' Key Included No bit slippageCapacity: 5/64'' to 1/2''. Mounting holes: Jacobs taper #33. Mandrel taper: MT2. Mandrel material: 1010 low carbon steel.


NOVA JS100N 100mm Chuck Accessory Jaw Set
By Nova
In Stock
$52.19

mpn: JS100N, ean: 0787721460701,

4.2 out of 5 stars with 59 reviews
IMPORTANT NOTICE Safety Advisory! Only use authentic NOVA accessories on your NOVA chuck. Using non genuine NOVA and copies of accessories could lead to operation and safety issues and will void our market leading warranty. NOVA accessories are designed for use only on NOVA Chucks. Do not use on any other chuck.Designed for expanded dovetail, reverse dovetail for gripping footed bowls. One of the most popular accessories for mounting 12-14-Inch bowls. Same jaw fixing system across all NOVA Chuc


NOVA JS70N 70mm Chuck Accessory Jaw Set
By Nova
In Stock
$42.99

mpn: JS70N, ean: 0787721577386,

4.7 out of 5 stars with 11 reviews
IMPORTANT NOTICE Safety Advisory! Only use authentic NOVA accessories on your NOVA chuck. Using non genuine NOVA and copies of accessories could lead to operation and safety issues and will void our market leading warranty. NOVA accessories are designed for use only on NOVA Chucks. Do not use on any other chuck.Special NOVA dovetail profile, designed to maximum strength and holding in wood turning, without crushing wood fibers. All NOVA Chuck accessory jaws are designed to hold in the expansion



Viewing Page 2 of 3



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - oahu-handyman.com. All Rights Reserved.