Tapered / End Mills - Page 2 - Huge Savings! Save up to 13%


Huge Savings! Up to 13% off on Tapered (in End Mills) at Oahu Handyman, Page 2 [230]. Top brands include Micro 100, Titan, STAR USA, Pferd, Keentools, Star USA, LFA / Reichel Hardware, MEDA, Go-Stock, Adumly, SOLIUNIMILL, NSSTK, Milling Cutter Tool, & colorparts2016. Hurry! Limited time offers. Offers valid only while supplies last.



Micro 100 TSM-250-5X 3 Flute 30° Helix Stub Length Tapered End Mill, AlTIN Coated, 1/8" Small Diameter, 1/2" Flute Length, 5° Angle per Side, 1/4"Shank Diameter, 2.5" Overall Length, Solid Carbide Tool
By Micro 100
In Stock
$46.95
$45.93
You Save: 2%

mpn: TSM-250-5X, ean: 0728709185438,

4.6 out of 5 stars with 58 reviews
MICRO 100, TSM-250-5X, AlTiN - Aluminum Titanium Nitride coated, solid carbide, 30° helix, 3 flute, center cutting, stub length, tapered end mill. Designed and engineered to cut very fine detail while maintaining tool strength. Typically, the smaller the cutting tool diameter, the weaker the tool. With the geometries of the ''taper'', it adds more strength . Tapered end mills are mostly used on applications such as walls with draft or clearance angle, tool and dies, mold making, and even reamin


Titan TR97572 High Speed Steel Taper Pin Reamer, Left Hand Spiral, Right Hand Cut, 2", 0.1137" Small Diameter, 0.1462" Large Diameter, 5/32" Shank Diameter, 2-5/16" Overall Length
By Titan
In Stock
$51.90

mpn: TR97572,

4.7 out of 5 stars with 21 reviews
Series 991 High Speed Steel Taper Pin Reamer, Left Hand Spiral, Right Hand CutMade in USA. Taper Pin Reamer. Left-Hand Spiral Flute. High Speed Steel.


1/8" Tip Dia. x 1" Flute Length - Solid Carbide Tapered End Mill - 6 Degree Per Side, Ball End
By STAR USA
In Stock
$60.79

mpn: 7620926,

4.1 out of 5 stars with 51 reviews
Material: All tapered end mills are produced from a premium grade of super submicrograin carbide to give you the maximum hardness and toughness. This means longer cutting life with less breakage * Grinding: All flutes are hollow ground with double clearance angles. The flute face is also hollow ground and polished to assure free cutting actions with minimum of heat generation. All tools have end cutting teeth. Special grinding procedures and equipment assures a high degree on concentricity betwe


PFERD 14 Degree Taper Carbide Bur, Clog-Resistant, Uncoated (Bright) Finish, Single Cut, Radius End, 1/4" Shank, 1/2" Head Diameter, 1-1/8" Head Length (SL-4)
By Pferd
In Stock
$66.74
$66.67

mpn: 25165, ean: 0097758251655,

4.4 out of 5 stars with 42 reviews
The Pferd Alu Cut clog-resistant single-cut carbide bur has a 14-degree taper shape with a radius end, an uncoated (bright) finish, and a 1/4'' shank diameter, and is for use on nonferrous metal such as aluminum and aluminum alloys, and plastic. The Alu Cut single-cut design is clog resistant with larger flutes than a standard single-cut bur for high stock removal and efficient chip evacuation on nonferrous metal and plastic. The bur has a 14-degree taper shape with a radius end, also known as s


5Pcs Tungsten Carbide Taper End Mill Tool, HRC55 Ball Woodworking Bit Router for 3D Relief (G17)
By Keentools
In Stock
$175.99

ean: 5712443849973,

4.0 out of 5 stars with 12 reviews
Features: ★Superior Tungsten Carbide material. ★Excellent sharpness and durability. ★Extended shelf-life packaging. ★Full range of specifications and sizes. ★Competitive Price From Factory Directly. Specification: Material: tungsten steel. Color: silver as shown in the picture. Max.cutting depth:Optional. Total length/Overall Length (OAL): Optional. Blade type:Taper Ball Nose Spiral End Mills. Keentools blade is 17 years blade manufacturer,We provide you ideal cutting solution and sug


Tapered End Mills (H.S.S.) - 20, 25 & 30 Degree Per Side Tip Dia.: 1/8", LOC: 1/2", Shank: 1/2", OAL: 2-1/2", 30 Degree
By Star USA
In Stock
$52.26

mpn: 99202141952,

4.0 out of 5 stars with 25 reviews
Taper: 30° Per Side / Square End / Standard CNC 4 Flute / A tapered end mill is designed for side milling, contouring and machining angled slots. They are generally used in die-casts and molds. It is a center-cutting tool that can be used for plunging. Made in USA.High Speed Steel. Tip Diameter: 1/8''. Flute Length: 1/2''. Shank Diameter: 1/2''. Overall Length: 2-5/8''.


LFA / Reichel Hardware R8-J6 R8 Bridgeport by J6 Taper Arbor, Chrome
By LFA / Reichel Hardware
In Stock
$57.41

mpn: R8-J6, ean: 8797780984508,

4.8 out of 5 stars with 25 reviews
Made in France.; Guaranteed to run true and balanced.; Material is high grade steel and 100% hardened for long life.; Ground on centers to give the most accuracy between the drill chuck and machine tool.; Press fit Jacobs Taper, to ensure a non slip fit with drill chuck.Shank size: R8 Bridgeport. Chuck (Jacobs) Taper: 6J. Note: Photo shows an R8 Bridgeport to Jacobs Taper arbor, but not necessarily this specific arbor. Please do not use the photo to judge the relative size of the taper.


Shell End Mill Arbors With "R-8" Taper (Meda & Bison Series 374) 1-1/2" Hole Dia. / 4 - 5" Range
By MEDA
In Stock
$59.20
4.5 out of 5 stars with 22 reviews
* Made of alloy forged steel for long, durable service life. * Hardened to RC 56-60 and ground to ensure maximum accuracy. * Shell End Mill Pilot T.I.R.Hole Diameter: 1-1/2'' Range of Shell E/M: 4 to - 5. Range of Shell E/M: 4 to - 5.


7:24 Taper Shank Spiral Flute end Mill for Steel mat'l
By Go-Stock
In Stock
$97.06

mpn: 1511·022/3232·40,

4.4 out of 5 stars with 40 reviews
1.Fully enables running at rough machining parameters, resulting in finish surface quality. 2.Excellent performance in machining titanium, stainless steel and high temperature alloys. 3.The coating provides longer tool-life or increased cutting-values. 4.Suitable for all types of steel or metal.This is the price of Order No.1511·022/3232·40. If you are interested in others, please send us a message or email us.. Industrial Suitable for uneven and Interrupted cut of roughing machining, Rough an


Adumly Set of 35Pcs Router Bit Set 1/2'' Shank Tungsten Carbide Bits Woodworking Hardwood Tool
By Adumly
In Stock
$71.99

ean: 0752941833888,

4.9 out of 5 stars with 22 reviews
These tools are necessary for woodworker to do their work, they professional woodworking tool router bit which are designed to cut hardwood, cork wood, composite board, medium density fiberboard. It is also suitable for those who want to built their own woodwork by themslves. There are 35 pieces of tools in the case which is specially designed to fit the tools. With so many sizes of tools, the woodwork will be much eaiser than before. - Color: Yellow - Material: Metal - Size: 32 x 22 x 6 cm - Sh


SOLIUNIMILL 5Pcs/Lot R0.25D420.550L2F HRC55 Tungsten Solid Carbide Coated Tapered Taper Ball Nose End Mill Cone Type CNC Milling Cutter
By SOLIUNIMILL
In Stock
$44.35

mpn: EM190721, ean: 5071772725533,

4.3 out of 5 stars with 10 reviews
Overall Length:50MmMaterial:Tungsten Cobalt AlloyDiameter:4MmCoating:TiainType:End MillOverall Length:50Mm. Material:Tungsten Cobalt Alloy. Diameter:4Mm. Coating:Tiain. Type:End Mill.


1Pc HRC55 Tapered Ball Nose End Mill Tungsten Solid Carbide Coated Tapered Cone Cnc Milling Cutter D3.175-D12mm Engraving Bit R0.75x20xD6x50
By NSSTK
In Stock
$18.99

mpn: D33577916, ean: 5098167742821,

4.8 out of 5 stars with 25 reviews
Overall Length:38-120MmType:End MillDiameter:3.175/4/6/8/10/12MmCoating:NANOMaterial:Imported Tungsten SteelOverall Length:38-120Mm. Type:End Mill. Diameter:3.175/4/6/8/10/12Mm. Coating:NANO. Material:Imported Tungsten Steel.


2Pcs R2D630.575L2F HRC55 Tungsten Solid Carbide Coated Tapered Ball Nose End Mills Taper And Cone Endmills
By NSSTK
In Stock
$43.17

mpn: D33577916, ean: 5093081731050,

4.7 out of 5 stars with 53 reviews
Material:CarbideType:End MillDiameter:6MmCoating:TiainOverall Length:75MmDegree:R0.1Material:Carbide. Type:End Mill. Diameter:6Mm. Coating:Tiain. Overall Length:75Mm.


2Pcs R0.25/R0.5/R0.75/R1 HRC55 Taper Ball Nose End Mill Tapered Cone Milling Cutter CNC Woodworking Router Bit 3.175Mm 1/8" SHK Mix Ordermessage
By NSSTK
In Stock
$19.46

mpn: D33577916, ean: 5031689269346,

4.3 out of 5 stars with 38 reviews
Diameter:3.175MmDegree:R0.1Material:CarbideOverall Length:38MmType:End MillCoating:NANODiameter:3.175Mm. Degree:R0.1. Material:Carbide. Overall Length:38Mm. Type:End Mill.


1Pc HRC55 D3.175-D6mm Tapered Ball Nose End Mill Tungsten Solid Carbide Coated Tapered Cone Cnc Milling Cutter R1.0x30.5xD6x75L
By NSSTK
In Stock
$31.38

mpn: D33577916, ean: 5098167746898,

4.6 out of 5 stars with 50 reviews
Diameter:3.175/4/6MmCoating:TiainMaterial:CarbideType:Ball Nose End MillsOverall Length:39-750MmDiameter:3.175/4/6Mm. Coating:Tiain. Material:Carbide. Type:Ball Nose End Mills. Overall Length:39-750Mm.


1Pc HRC55 Tapered Ball Nose End Mill Tungsten Solid Carbide Coated Tapered Cone Cnc Milling Cutter D4-D10mm Engraving Bit 1853
By Milling Cutter Tool
In Stock
$35.44

mpn: 5044892498946, ean: 5074723242998,

4.9 out of 5 stars with 18 reviews
Degree:R0.1Coating:TiainType:End MillMaterial:CarbideDiameter:4Mm 6Mm 8Mm 10MmOverall Length:50-100MmDegree:R0.1. Coating:Tiain. Type:End Mill. Material:Carbide. Diameter:4Mm 6Mm 8Mm 10Mm.


MT5 ER25 MTB5 ER25UM Morse Spindle Taper shank collet chuck tool M20 Thread Drawbar For Milling Machine CNC Lathe
By colorparts2016
In Stock
$69.90
$65.80
You Save: 6%

ean: 0649910371062,

4.9 out of 5 stars with 15 reviews
Condition: 100% Brand New Product Name: Morse Spindle tool Model : MT5-ER25/MTB5-ER25 Collet Nut : ER25 Thread: M20 MT Shank : MT5 Color: Silver and Black Shaft Material: Steel 40cr, HRC48-50 Package Content: 1x MT5-ER25This item is mainly used for MT milling machine to improve the hardness and endurance of the surface.. The milling Tool is mounted on an arbor, where it is held in place by spacers or bushings.. The nuts can be tighten directly, high rigidity, strong clamping..


1Pc HRC55 Tapered Ball Nose End Mill Tungsten Solid Carbide Coated Tapered Cone Cnc Milling Cutter D4-D10mm Engraving Bit 1857
By Milling Cutter Tool
In Stock
$48.02

mpn: 5044892498984, ean: 5074723243032,

4.1 out of 5 stars with 23 reviews
Degree:R0.1Coating:TiainType:End MillMaterial:CarbideDiameter:4Mm 6Mm 8Mm 10MmOverall Length:50-100MmDegree:R0.1. Coating:Tiain. Type:End Mill. Material:Carbide. Diameter:4Mm 6Mm 8Mm 10Mm.


1Pc HRC55 Tapered Ball Nose End Mill Tungsten Solid Carbide Coated Tapered Cone Cnc Milling Cutter D4-D10mm Engraving Bit 1856
By Milling Cutter Tool
In Stock
$48.02

mpn: 5044892498977, ean: 5074723243025,

4.7 out of 5 stars with 50 reviews
Degree:R0.1Coating:TiainType:End MillMaterial:CarbideDiameter:4Mm 6Mm 8Mm 10MmOverall Length:50-100MmDegree:R0.1. Coating:Tiain. Type:End Mill. Material:Carbide. Diameter:4Mm 6Mm 8Mm 10Mm.


MT5 ER32 MTB5 ER32UM Morse Spindle Taper shank collet chuck tool M20 Thread Drawbar For Milling Machine CNC Lathe
By colorparts2016
In Stock
$79.90
$69.90
You Save: 13%

ean: 0649910370997,

4.3 out of 5 stars with 30 reviews
Condition: 100% Brand New Product Name: Morse Spindle tool Model : MT5-ER32/MTB5-ER32 Collet Nut : ER32 Thread: M20 MT Shank : MT5 Color: Silver and Black Shaft Material: Steel 40cr, HRC48-50 Package Content: 1x MT5-ER32This item is mainly used for MT milling machine to improve the hardness and endurance of the surface.. The milling Tool is mounted on an arbor, where it is held in place by spacers or bushings.. The nuts can be tighten directly, high rigidity, strong clamping..



Viewing Page 2 of 3



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - oahu-handyman.com. All Rights Reserved.