Taps / Taps & Dies - Page 2 - Super Savings! Save up to 40%


Super Savings! Up to 40% off on Taps (in Taps & Dies) at Oahu Handyman, Page 2 [292]. Top brands include ATOPLEE, GAVAN, Irwin, Yodaoke, Drill America, IRWIN, Vermont American, MPI Tools, GZTool, Westward, WestWard Tools, Dormer, Alfa Tools, SoHome, B&B Supply Corp., Union Butterfield, Micro 100, & Walton. Hurry! Limited time offers. Offers valid only while supplies last.



Atoplee 7pcs Metric HSS Left Hand Thread Tap M3-M12
By ATOPLEE
In Stock
$16.40

mpn: 43237-2, ean: 0769700160017,

4.2 out of 5 stars with 20 reviews
Specification: Material: HSS Net Weight:0.005/0.006/0.008/0.017/0.018/0.028/0.04kg Thread Direction: Left hand Package Included: 7x Left hand Thread Tap 100% quality and Brand new.Material :High Speed Steel. Type:M3*0.5/M4*0.7/M5*0.8/M6*1.0/M8*1.25/M10*1.5/ M12*1.75HSS. Thread Diameter:3/4/5/6/8/10/12mm, Total Length:51/56/61/70/72/76/86mm. Square Head Size:(L*W):2.5x2.5/3.1x3.1/4.0x4.0/5.0x5.0/5.0x5.0/6.3x6.3/7.0x7.0mm. Shank Diameter:3.0/4.0/5.1/6.0/6.3/8.0/9.0mm,Pitch:0.5/0.7/0.8/1.0/


M20 x 1.5 Metric HSS Right hand Thread Tap
By GAVAN
In Stock
$19.00
$13.99
You Save: 26%

mpn: TM-2015G, ean: 0616469088697,

4.0 out of 5 stars with 9 reviews
Brand new metric HSS right hand thread tap M20 x 1.5mm pitch.Metric M20 x 1.5mm right hand thread Tap. Diameter: 20mm. Pitch size: 1.5mm.


Irwin Industrial Tools 1921ZR Taper Pipe Tap Set, 6-Piece
By Irwin
In Stock
$95.38
$95.02

mpn: 1921ZR, ean: 0042526019210,

4.5 out of 5 stars with 27 reviews
Features and Benefits: cuts internal threads in pipes nominal size of the tap is that of the pipe fitting being tapped ideal for pipe fittings tapered at a rate of 3/4'' per foot comes in a Plastic case set includes one taper tap each of: 1/8'' - 27 npt 1/4'' - 18 npt 3/8'' - 18 npt 1/2'' - 14 npt 3/4'' - 14 npt 1'' - 11-1/2 npt.Cuts internal threads in pipes. Ideal for pipe fittings.. Nominal size of the tap is that of the pipe fitting being tapped. Available in National Pipe Taper (NPT) and Br


HSS 11mm x 1.25 Metric Tap Right Hand Thread M11 x 1.25mm Pitch
By Yodaoke
In Stock
$12.49

mpn: M11 x 1.25mm, ean: 0755320646161,

4.6 out of 5 stars with 18 reviews
HSS 11mm x 1.25 Metric Tap Right Hand ThreadHSS Metric Tap Right Hand Thread M11 x 1.25mm Pitch. Material: HSS. Total length: 80mm. Qty: 1pcs.


Drill America 6 Piece NPT Pipe Tap, Carbon Steel, DWTPT Series Set 1/4", 3/8", 1/2", 3/4", 1" and 1-1/4" in Wooden Case
By Drill America
In Stock
$58.59
$56.38
You Save: 4%

mpn: DWTPT1/4-1-1/4SET, ean: 0887861241618,

4.3 out of 5 stars with 34 reviews
6 Piece Carbon Steel NPT Pipe Tap Set with Sizes 1/4'', 3/8'', 1/2'', 3/4'', 1'' and 1-1/4'' in Wood Case Carbon steel pipe taps are designed to clean and or re-thread damaged or jam pipe threads Also called 'pipe taps', National pipe taper taps are appropriate for Threading a wide variety of materials both ferrous and non-ferrous. The nominal size of a pipe Tap is that of the pipe fitting to be tapped, not the actual size of the Tap. The thread tapers 3/4 of an inch per foot. All pipe taps furn


IRWIN 1907ZR Tap 1"-11 1/2" Npt Pipe
By IRWIN
SKU: #HAN1907
In Stock
$29.59
$29.35

sku: HAN1907, mpn: 1907ZR, ean: 0042526019074,

4.6 out of 5 stars with 59 reviews
Tap 1''-11 1/2Npt Pipe ''.1907Zr - Tap 1''-11 1/2Npt Pipe ''. Made in the United States. Threading taps .


Vermont American 21146 12MM-1.25 High Carbon Steel Metric Spark Plug Tap
By Vermont American
In Stock
$24.77

mpn: 21146, ean: 0045325211465,

4.1 out of 5 stars with 44 reviews
Vermont American 21146 12MM To 1.25MM Metric TapsHigh carbon steel metric taps are ideal for cutting internal threads in import cars, motorcycles and machinery.. Four flute design on all taps ensures fast and easy chip clearance..


IRWIN 1909ZR Tap 1 1/2"-11 1/2" Npt Pipe
By IRWIN
In Stock
$77.88
$46.61
You Save: 40%

mpn: 1909ZR, ean: 0042526019098,

4.8 out of 5 stars with 12 reviews
Tap 1 1/2''-11 1/2Npt Pipe''.1909Zr - Tap 1 1/2''-11 1/2Npt Pipe''. Made in the United States. Threading taps .


Acme TAP High Speed Steel Choice of Sizes (1/2" 10 TPI Right Hand Acme)
By MPI Tools
In Stock
$34.95

mpn: MPI, ean: 0070449375724,

4.1 out of 5 stars with 33 reviews
ACME threads are generally used for machine traversing motions and CNC machinery. Also, used in jacks, valves, and other high load applications. These are for manual hand tapping. Made with High Speed Steel. They come packaged in a plastic storage holder. Labeled for easier identification.Single Pass Tap. ACME. Hight Speed Steel.


GZTool 7/18-18 UNS Left Hand Thread Tap 7/8'' - 18 TPI High Speed Steel HSS
By GZTool
In Stock
$35.00

mpn: MGTLHT000785, ean: 0603470997902,

4.7 out of 5 stars with 35 reviews
Brand new and high quality. High speed steel (HSS) provides good wear-resistance and can be used in general purpose applications for both ferrous and non-ferrous materials. Provides a smooth, polished finish on the tool. Model / Size: 7/8'' - 18. Nominal diameter (D): 7/8''. Threads per inch (TPI): 18. Material: HSS. Cutting direction: Left hand. Flute type: Straight flute.7/8'' - 18 TPI UNS left hand thread tap. Thread diameter: 7/8''. Threads per inch (TPI): 18. Material type: high spe


Pipe Tap, Taper, 3/4-14, Uncoated, 5 Flt
By Westward
In Stock
$51.07

mpn: 5TWU1,

4.6 out of 5 stars with 50 reviews
Pipe Tap, Right Hand, Tap Style Taper, Size 3/4 In. , Pitch 14, Material High Speed Steel, Uncoated Finish, Overall Length 3-1/4 In. , Thread Length 1-3/8 In. , Shank Dia. 0. 906 In. , Number of Flutes 5, Thread Type NPT, Pitch Diameter Limits 3B, Standards ANSIPower Cutting & Sawing. Country of manufacture: China. Manufacturer: Westward.


Westward 5TWU4 Tap, Taper Pipe, 1 1/2in
By WestWard Tools
In Stock
$160.67

mpn: 5TWU4,

4.0 out of 5 stars with 53 reviews
High-quality uncoated pipe tap helps you cut precise internal threads in pipes. NPT thread type. Use with free-running and screw-locking Heli-Coil threaded inserts. Heavy-duty taps are for use with a wide variety of materials. Tap, Taper, 1-1/2''-11-1/2, Uncoated, 7 FltChina.


Dormer E0615/8NO3 General Purpose Hand Taps, Bright Coating, Bottoming Chamfer Length, TPUNC11, Full Length 3.13/16", Nominal D 5/8, Flute Length 0.9843", Shank Diameter 0.4800"
By Dormer
In Stock
$53.94

mpn: E0615/8NO3, ean: 7320760348697,

4.2 out of 5 stars with 23 reviews
The Dormer MTT E061/MTT E071 high-speed steel hand threading tap has straight flutes, a round shank with a square end, and a gold oxide finish on sizes below 1”, and is used to create right-hand threads in a range of materials, with best performance in cast iron, aluminum, and magnesium. It is available in two different ANSI thread specification standards: UNC (Unified Coarse) or UNF (Unified Fine). The straight flutes are suitable for threading through holes (extending through the workpiece)


Drill America 41/64" High Speed Steel Straight Flute Hand Reamer, DWR Series
By Drill America
In Stock
$48.50

mpn: DWRRHD41/64, ean: 0887861146852,

4.5 out of 5 stars with 22 reviews
Drill America DWRRHD series Qualtech hand reamer. It is made of high-speed steel and is generally used by hand for the final sizing of holes. The square on the shank is suitable for holding in a tap wrench or a vise depending on whether the reamer or the part is rotated. A long starting taper is ground into the reamer for easy entry and accurate alignment. The straight-flute hand reamer is recommended for most hand reaming applications.High-speed steel tools are good for most general purpose app


Alfa Tools TDS66006NPT 6 Pc Carbon Steel Npt Pipe Tap Set,
By Alfa Tools
In Stock
$147.10
$119.08
You Save: 19%

mpn: TDS66006NPT, ean: 0721511002276,

4.9 out of 5 stars with 54 reviews
Alfa Tools tap and die sets. 6 -piece carbon steel NPT pipe tap set. Includes: 6 NPT pipe taps. Size and threads per inch (NPT sizes): 1/4-18, 3/8-18, 1/2-14, 3/4-14, 1-11-1/2, 1-1/4-1-1/2Pipe tap 6-Piece set in wood case. Sizes and threads per inch (NPT sizes): 1/4-18, 3/8-18, 1/2-14, 3/4-14, 1-11-1/2, 1-1/4-1-1/2. Contains 6 national pipe thread pipe taps. Made of high carbon steel. Quantity: 1 set in wooden case.


SoHome LED hand-piece 45 degree Surgical Hand Kit Air Turbine 4Holes
By SoHome
In Stock
$62.00

ean: 0603307891571,

4.8 out of 5 stars with 55 reviews
Technical Data: 1.Air pressure: 0.2Mpa-0.4Mpa 2.Water pressure:0.2Mpa-0.4Mpa 3.Rotation speed: 38,0000rpm-48,0000rpm 4.Bur applicable: 1.59mm-1.6mm 5.Input Voltage: 2.5-3.5V 6.Input current: 200-350mA 7.Noise: ≤65dB 8.Disinfection: available at 135°CWater spray: single water spray. Cartridge: ceramic bearings, good sound. Material of body: copper (main)and stainless steel.


5/8" - 8 HIGH SPEED STEEL RH TANDEM STYLE ACME TAP
By B&B Supply Corp.
In Stock
$51.00

ean: 0112400840084,

4.1 out of 5 stars with 9 reviews
High Speed Steel Tandem Style Acme Tap - ''roughing and finishing tool in one'' - Class 2G fit, RH.Premium Import!. Quality and Performance to satisfy you!. CLASS ''2G'' FIT. Overall Length: 6-1/4''. Thread Length: 3-3/16''.


Union Butterfield 1545(NPT) High-Speed Steel Pipe Tap, High-Hook, Uncoated (Bright) Finish, Round Shank with Square End, 1/2"-14 Thread Size
By Union Butterfield
In Stock
$73.39
$66.97
You Save: 9%

mpn: 15451/2X14, ean: 0698464020599,

4.7 out of 5 stars with 14 reviews
The Union Butterfield 1545(NPT) uncoated, high-speed steel pipe tap has straight flutes with high hook and a round shank with a square end, and is used to create NPT (National Pipe Taper) right-hand threads in a range of materials, with strength in carbon steel and alloy steel. NPT thread is an ANSI-standard thread configuration designed to be used with a sealant to create a leak-free tapered pipe joint. The straight flutes are suitable for threading through holes (extending through the workpiec


Micro 100 TM-060-6 Solid Carbide Precision Thread Mill, 2 Flutes, 0.060" Cutter Diameter, 0.030" Neck Diameter, 3/8" Neck Length, 0" Flat, 0.017" Thickness, 56 to 80 Threads per Inch, 1/8" Shank Diameter, 1.5" Overall Length
By Micro 100
In Stock
$57.55
$56.30
You Save: 2%

mpn: TM-060-6, ean: 0728709183830,

4.7 out of 5 stars with 34 reviews
MICRO 100, TM-060-6 helical flute, UN - unified, solid carbide thread mill. Designed and engineered with a helical flute design for reducing cutting forces, machining smoother cuts, longer lasting tool life and providing maximum thread milling performance. Capable of right and/or left hand threads while allowing for 100% thread form versus the tapping method. Best suited for all types of materials especially heat treated and difficult to machine workpiece materials MICRO 100 Solid Carbide Tools


Tap Extensions (Style B) - Inch / Metric Sizes & Set Size: 9/16" / 14mm, A: 11/16", C: .430", F: .428"
By Walton
In Stock
$74.25

mpn: 78740651703,

4.3 out of 5 stars with 26 reviews
Style: B / Provides easy access for hard-to-reach tapping locations. Tap is supported by close-fitting deep socket of extension and held firmly by two socket set screws which bear on the square tap shank. Standard length 8''. Hex key included. Made in USA.Tap Size: 9/16''. Tap Metric Size: 14mm.



Viewing Page 2 of 3

Browse Our Catalog




Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - oahu-handyman.com. All Rights Reserved.