Squeeze Action Clamps / Clamps - Mega Sale! Save up to 23%


Mega Sale! Up to 23% off on Squeeze Action Clamps (in Clamps) at Oahu Handyman [322]. Top brands include Hanson Rivet, Aircraft Tool Supply, Generic, FindingKing, Sterling, Eclipse, & Cealu. Hurry! Limited time offers. Offers valid only while supplies last.



HC-84 1/4" RIVETING CLAMP with A 0 to 1/4" Grip Range (Pack of 50)
By Hanson Rivet
In Stock
$103.55

mpn: HC84, ean: 0812373030443,

4.8 out of 5 stars with 60 reviews
HC-84 1/4'' RIVETING CLAMP WITH A 0 TO 1/4'' GRIP RANGE (Pack of 50)Hanson Rivet clamps are a temporary fastener used to hold sheets and components together during riveting.. Typically installed in every other hole - preventing the rivet holes from becoming misaligned during rivet installation.. Rivets are installed in the remaining holes then the clamps are removed.. Other size dimensions available: 1/16'', 3/32'',1/8'', 5/32'', 3/16'' & 3/16''..


Aircraft Tool Supply Squeezer Yoke (5-5/8")
By Aircraft Tool Supply
In Stock
$155.95

mpn: 14-9,

4.6 out of 5 stars with 40 reviews
Yoke, Squeezer, 5-5/8'' Deep, 1-3/16'' High. Fits ATS-114C, Chicago Pneumatic 214C, and 0214C series squeezers.


HC-84 1/4" RIVETING CLAMP with A 0 to 1/4" Grip Range (Pack of 25)
By Hanson Rivet
In Stock
$68.15

mpn: HC84, ean: 0812373030436,

4.5 out of 5 stars with 9 reviews
HC-84 1/4'' RIVETING CLAMP WITH A 0 TO 1/4'' GRIP RANGE (Pack of 25)Hanson Rivet clamps are a temporary fastener used to hold sheets and components together during riveting.. Typically installed in every other hole - preventing the rivet holes from becoming misaligned during rivet installation.. Rivets are installed in the remaining holes then the clamps are removed.. Other size dimensions available: 1/16'', 3/32'',1/8'', 5/32'', 3/16'' & 3/16''..


48 30 Pack nail-in cable clamps
By Generic
In Stock
$83.47

mpn: KO-MP030 (48),

4.6 out of 5 stars with 27 reviews
30 pc easily hold wire and cable securely in place. nails are perpendicular to the work surface and are straight, greatly reducing cracking.


144 30 Pack nail-in cable clamps
By FindingKing
In Stock
$186.52

mpn: KO-MP030 (144),

4.1 out of 5 stars with 46 reviews
30 pc easily hold wire and cable securely in place. nails are perpendicular to the work surface and are straight, greatly reducing cracking.


Aircraft Tool Supply Ats Heavy Duty Rivet Squeezer (3")
By Aircraft Tool Supply
In Stock
$169.95

mpn: 5022-3A,

4.2 out of 5 stars with 7 reviews
This is our most popular rivet squeezer, and our customers love it because its heavy duty design will hold up to even the most brutal punishment. The handles are formed from .060'' thick cold-rolled steel tubing that resists bending, even under heavy pressure. The ram assembly is engineered to operate smoothly while delivering the maximum possible leverage without breaking - in fact, our ram assembly has been tested to 6,000 lbs without any indication of failure! And finally, the yoke head is pr


30 Pack Nail-In Cable Clamps - Case of 72
By Sterling
In Stock
$101.27
$77.82
You Save: 23%

mpn: MP030, ean: 0731015129744,

4.2 out of 5 stars with 55 reviews
30 pc easily hold wire and cable securely in place. nails are perpendicular to the work surface and are straight, greatly reducing cracking.


HC-84 1/4" RIVETING CLAMP with A 0 to 1/4" Grip Range (Pack of 10)
By Hanson Rivet
In Stock
$38.15

mpn: HC84, ean: 0812373030429,

4.6 out of 5 stars with 52 reviews
HC-84 1/4'' RIVETING CLAMP WITH A 0 TO 1/4'' GRIP RANGE (Pack of 10)Hanson Rivet clamps are a temporary fastener used to hold sheets and components together during riveting.. Typically installed in every other hole - preventing the rivet holes from becoming misaligned during rivet installation.. Rivets are installed in the remaining holes then the clamps are removed.. Other size dimensions available: 1/16'', 3/32'',1/8'', 5/32'', 3/16'' & 3/16''..


PNEUMATIC "A" SQUEEZER 3" JAWS
By Aircraft Tool Supply
In Stock
$769.95

mpn: ATS-114A-30,

4.1 out of 5 stars with 53 reviews
The new ATS Alligator Squeezer is a lightweight, compact, and powerful riveter modeled after the industry standard Chicago Pneumatic 0214-A squeezer. The parts are completely interchangeable, and it will accept any jaws and accessories compatible with the 0214-A squeezer. With enough force to squeeze up to 3/32'' solid aluminum, or 1/16'' mild steel rivets, this riveter will easily fit most of your riveting needs without breaking your budget.•Squeezes up to 3/32'' aluminum or 1/16'' mild steel


Aircraft Tool Supply Ats Heavy Duty Rivet Squeezer (1-1/2")
By Aircraft Tool Supply
In Stock
$135.95

mpn: 5011-1A,

4.8 out of 5 stars with 31 reviews
This is our most popular rivet squeezer, and our customers love it because its heavy duty design will hold up to even the most brutal punishment. The handles are formed from .060'' thick cold-rolled steel tubing that resists bending, even under heavy pressure. The ram assembly is engineered to operate smoothly while delivering the maximum possible leverage without breaking - in fact, our ram assembly has been tested to 6,000 lbs without any indication of failure! And finally, the yoke head is pr


Aircraft Tool Supply Squeezer Yoke (1-1/2")
By Aircraft Tool Supply
In Stock
$69.95

mpn: 14-3,

4.1 out of 5 stars with 8 reviews
Yoke, Squeezer, 1-1/2'' Deep, 1-1/4'' High. Fits ATS-114C, Chicago Pneumatic 214C, and 0214C series squeezers.


30 Pack nail-in cable clamps - Case of 144
By Sterling
In Stock
$186.52

mpn: MP030, ean: 0100071646999,

4.8 out of 5 stars with 34 reviews
30 pc easily hold wire and cable securely in place. nails are perpendicular to the work surface and are straight, greatly reducing cracking.


Eclipse ELPW36 Leader Pattern Pipe Wrench, 36" Size
By Eclipse
In Stock
$58.63

mpn: ELPW36, ean: 5012095070542,

4.7 out of 5 stars with 17 reviews
The Eclipse Leader Pattern Pipe Wrench (frame & handle) is made from a one piece ductile iron casting which is guaranteed unbreakable, while the flash hardened teeth increase wear resistance. The hardened and tempered steel adjustment nut gives a longer working life and the precision machined screw thread and spring jaw remain open until pressure is applied.Length of 36'' when open; Pipe capacity of 5''. Frame and handle are made from one piece ductile iron casting, guaranteed unbreakable, while


Aircraft Tool Supply Longeron Yoke (5011 & 5022 Series Squeezers)
By Aircraft Tool Supply
In Stock
$95.95

mpn: RS1004A,

4.3 out of 5 stars with 49 reviews
Designed to reach around angle brackets and channels typically found in longerons and sitffners. Precision machined from solid billet of tool steel and hardened to resist wear. For use with the ATS-Pro 5011 AND 5022 series Rivet Squeezers. Lifetime ATS-Pro warranty.


Aircraft Tool Supply Rivet Squeezer Bench Upgrade Kit
By Aircraft Tool Supply
In Stock
$55.95

mpn: RS-BK,

4.0 out of 5 stars with 22 reviews
Upgrade kit converts 5011-1 and 5022-3 Rivet Squeezers to new bench model. Easy to install. Does not work with older model rivet squeezers.


Aircraft Tool Supply 4" Deep Reach Yoke (5011 & 5022 Series Squeezers)
By Aircraft Tool Supply
In Stock
$99.95

mpn: RS1005A,

4.8 out of 5 stars with 31 reviews
Long 4'' reach x 1-1/4'' Gap Height to get into difficult areas. Recommend that you use this yoke with our Bench Mounting Bracket (p/n RS-BK) for extra stability. Precision machined from solid billet of tool steel and hardened to resist wear. For use with the ATS-Pro 5011 AND 5022 series Rivet Squeezers. Lifetime ATS-Pro warranty.


Aircraft Tool Supply 1-1/2" Close Quarters Yoke (5011 & 5022 Series Squeezers)
By Aircraft Tool Supply
In Stock
$75.95

mpn: RS1006A,

4.8 out of 5 stars with 38 reviews
Head clearance is only 1/4'' to get into very tight areas. 1-1/2'' Reach x 1-1/4'' Gap Height. Will not flex even when driving 3/16'' rivets. Precision machined from solid billet of tool steel and hardened to resist wear. For use with the ATS-Pro 5011 AND 5022 series Rivet Squeezers. Lifetime ATS-Pro warranty.


Aircraft Tool Supply 3" Close Quarters Yoke (5011 & 5022 Series Squeezers)
By Aircraft Tool Supply
In Stock
$79.95

mpn: RS1007A,

4.7 out of 5 stars with 17 reviews
Head clearance is only 1/4'' to get into very tight areas. 3'' Reach x 1-1/4'' Gap Height. Will not flex even when driving 3/16'' rivets. Precision machined from solid billet of tool steel and hardened to resist wear. For use with the ATS-Pro 5011 AND 5022 series Rivet Squeezers. Lifetime ATS-Pro warranty.


Aircraft Tool Supply 3" Squeezer Yoke (Super Duty)
By Aircraft Tool Supply
In Stock
$49.95

mpn: ATSRS-3SDY,

4.3 out of 5 stars with 30 reviews
Replacement 3'' stainless steel yoke for ATSRS Super Duty Rivet Squeezers. 3'' reach (depth) by 1'' gap (height). Note: This yoke works with our Super Duty Rivet Squeezers (p/n's ATSRS-1SD, ATSRS-3SD, and SDRS-KIT)


Men's Running Sneakers Summer Athletic Outdoors Sport Jogging Shoes Casual Breathable Lightweight Lace-Up Knit Shoe (White, US:8)
By Cealu
In Stock
$16.99

ean: 0727207141519,

4.9 out of 5 stars with 53 reviews
Please note that slight color difference should be acceptable due to the light and screenNOTE:The Size will be smaller due to concave design , We suggest you select the appropriate size according to your foot length.➤ Size:39 ---Foot Length:24.5cm/9.7'' ---Foot wide:9.5cm/3.7'' ---CN:245 ---EU:39 ---UK:6 ---US:7 ➤ Size:40 ---Foot Length:25cm/9.8'' ---Foot wide:9.5-10cm/3.7-3.9'' ---CN:250 ---EU:40 ---UK:6.5 ---US:7.5 ➤ Size:41 ---Foot Length:25.5cm/10'' ---Foot wide:10cm/3.9'' ---CN:255



Viewing Page 1 of 2



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - oahu-handyman.com. All Rights Reserved.