Dormer E0615/8NO3 General Purpose Hand Taps, Bright Coating, Bottoming Chamfer Length, TPUNC11, Full Length 3.13/16'', Nominal D 5/8, Flute Length 0.9843'', Shank Diameter 0.4800''
Dormer E0615/8NO3 General Purpose Hand Taps, Bright Coating, Bottoming Chamfer Length, TPUNC11, Full Length 3.13/16'', Nominal D 5/8, Flute Length 0.9843'', Shank Diameter 0.4800'' by Dormer at Oahu Handyman. MPN: E0615/8NO3. Hurry! Limited time offer. Offer valid only while supplies last. The Dormer MTT E061/MTT E071 high-speed steel hand threading tap has straight flutes, a round shank with a square end, and a gold oxide finish on sizes below 1”, and is used to create right-hand threads in a range of materials, with best performance in cast iron, aluminum, and magnesium. It is available in two different ANSI thread specification standards: UNC (Unified Coarse) or UNF (Unified Fine). The straight flutes are suitable for threading through holes (extending through the workpiece)
Product Description & Reviews
The Dormer MTT E061/MTT E071 high-speed steel hand threading tap has straight flutes, a round shank with a square end, and a gold oxide finish on sizes below 1”, and is used to create right-hand threads in a range of materials, with best performance in cast iron, aluminum, and magnesium. It is available in two different ANSI thread specification standards: UNC (Unified Coarse) or UNF (Unified Fine). The straight flutes are suitable for threading through holes (extending through the workpiece) and blind or bottoming holes (with only one opening). Gold oxide is a low-temperature heat treatment that reduces grinding stress within the tool. In this series all sizes below a nominal diameter of 1” have the gold oxide finish; sizes 1” and larger have an uncoated (bright) finish. Right-hand threads are designed to tighten when the head or nut is rotated clockwise (the most common threading direction). High-speed steel (HSS) is a common general-purpose steel for cutting tools and is compatible with a variety of materials. With no coating or surface treatment, an uncoated tool can be used on a broad range of materials and provides an economical alternative to coated tools. The round shank with square end makes this tap suitable for hand or power-driven applications. This tool can be used in machines, such as drill presses or lathes, or with hand tools such as tap wrenches. In the Dormer MTT E061/MTT E071 series, taps that are machine-screw size 6 have three flutes and all other sizes have four flutes. They are available with a variety of chamfers. This tap conforms to ANSI standards and can create threads to a depth 1 ½ times its diameter. It is suitable for ANSI 2B and 3B tolerance classes: 2B is an average quality fit for commercial and industrial fasteners; 3B produces close-tolerance fasteners that resist loosening, as in aerospace applications. Taps produce internal threads in previously formed holes and can be used in machines (such as drill presses) or with hand tools. Common types of taps include hand taps, spiral point taps, spiral flute taps, thread forming taps, and pipe taps. Hand taps (straight-flute taps) collect chips in the straight flutes of the tool; spiral point taps push chips through holes ahead of the tool; and spiral flute taps pull chips back from the tip of the tool, up and out the hole. Thread forming taps, also known as cold forming taps, press rather than cut to create threads in a drilled hole, and no chips are created. Pipe taps create threads in pipes and pipe fittings. Each thread type designates a thread profile and each type is identified with an abbreviation. In the U.S. and Canada, the Unified Thread Standard is the dominant thread type, including UNC (Unified Coarse), UNF (Unified Fine), and NPT (National Pipe Taper) threads, among others. Dormer Pramet manufactures cutting tools under the following brands: Precision Twist Drill, Dormer, Union Butterfield and Pramet. The company has locations around the world, and provides tools adhering to ANSI, NAS, and DIN standards.
Features & Highlights
- Hand threading tap with straight flutes cuts threads in through holes and blind holes
- Gold oxide finish on smaller sizes reduces grinding stress within the tool
- Available in UNC (Unified Coarse) or UNF (Unified Fine) right-hand thread options for different applications
- High-speed steel for compatibility with a variety of materials
- Round shank with square end allows tap to be used in hand or power-driven applications
0.9 x 0.8 x 3.9 inches
Have questions about this item (E0615/8NO3), or would like to inquire about a custom or bulk order?
If you have any questions about this product by Dormer, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: DWRRHD41/64, ean: 0887861146852,
Drill America DWRRHD series Qualtech hand reamer. It is made of high-speed steel and is generally used by hand for the final sizing of holes. The square on the shank is suitable for holding in a tap wrench or a vise depending on whether the reamer or...
mpn: TDS66006NPT, ean: 0721511002276,
Alfa Tools tap and die sets. 6 -piece carbon steel NPT pipe tap set. Includes: 6 NPT pipe taps. Size and threads per inch (NPT sizes): 1/4-18, 3/8-18, 1/2-14, 3/4-14, 1-11-1/2, 1-1/4-1-1/2Pipe tap 6-Piece set in wood case. Sizes and threads per inch ...
Technical Data: 1.Air pressure: 0.2Mpa-0.4Mpa 2.Water pressure:0.2Mpa-0.4Mpa 3.Rotation speed: 38,0000rpm-48,0000rpm 4.Bur applicable: 1.59mm-1.6mm 5.Input Voltage: 2.5-3.5V 6.Input current: 200-350mA 7.Noise: ≤65dB 8.Disinfection: available at 135...
High Speed Steel Tandem Style Acme Tap - ''roughing and finishing tool in one'' - Class 2G fit, RH.Premium Import!. Quality and Performance to satisfy you!. CLASS ''2G'' FIT. Overall Length: 6-1/4''. Thread Length: 3-3/16''.