Niagara Cutter N50162 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 35 Degree Helix, 2 Flutes, 3'' Overall Length, 0.500'' Cutting Diameter, 0.500'' Shank Diameter


Niagara Cutter N50162 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 35 Degree Helix, 2 Flutes, 3'' Overall Length, 0.500'' Cutting Diameter, 0.500'' Shank Diameter by Niagara Cutter at Oahu Handyman. MPN: SP205-0.500-D2-S.3-Z2. Hurry! Limited time offer. Offer valid only while supplies last. The Niagara Cutter SP205 uncoated (bright) cobalt steel square nose end mill has two flutes and a 30-degree helix angle to mill a wide range of materials, including high-temperature alloys. The cobalt steel substrate can be run at faster speeds and stays sharp longer than high-speed steel tools, while offering greater resistance to heat and abrasion. With no coating or surface treatment, this uncoated tool can be used on a broad range of materials. The end mill’s two flutes have better chip-


Niagara Cutter N50162 Cobalt Steel Square Nose End Mill, Inch, Weldon Shank, Uncoated (Bright) Finish, Finishing Cut, 35 Degree Helix, 2 Flutes, 3'' Overall Length, 0.500'' Cutting Diameter, 0.500'' Shank Diameter by Niagara Cutter
4.1 out of 5 stars with 44 reviews
Condition: New
Availability: In Stock
$21.02


Quantity:  

 


Product Description & Reviews

The Niagara Cutter SP205 uncoated (bright) cobalt steel square nose end mill has two flutes and a 30-degree helix angle to mill a wide range of materials, including high-temperature alloys. The cobalt steel substrate can be run at faster speeds and stays sharp longer than high-speed steel tools, while offering greater resistance to heat and abrasion. With no coating or surface treatment, this uncoated tool can be used on a broad range of materials. The end mill’s two flutes have better chip-carrying capacity than end mills with more flutes while offering additional support when the tool goes deep into the material in applications with a high depth of cut. The 30-degree helix angle offers general-purpose machining. It balances lower angles’ strong cutting edge for difficult-to-machine materials with higher angles’ increased cutting action. The tool’s square end creates sharp, unrounded cuts, while the center-cutting design has cutting teeth at the end of the tool that support making pocket cuts, profiling, and slotting. Cutting diameter tolerance is +0.001” to -0.000”. The end mill has a Weldon shank. End mills are designed to remove material and create multi-dimensional shapes and profiles. They have cutting edges along the outside diameter and flutes that remove chips from the cutting area and allow cooling fluids to enter. If heat is not reduced effectively, the tool’s cutting edges will dull and additional material buildup can occur. The number of flutes can range from two to eight. Two-flute designs offer the most efficient chip removal, but more flutes provide a smoother finish. The shank is the end of the tool held in place by a tool holder or machine. Center-cutting end mills can create three-dimensional shapes and profiles, and make plunge cuts similar to a drill bit. Non-center-cutting end mills are for applications such as peripheral milling and finishing, but cannot make plunge cuts. Niagara Cutter has been designing and manufacturing precision cutting tools since 1954. Specializing in end mills, cutting mills, and saws, the company is based in New York and manufactures its tools at facilities in Pennsylvania and Massachusetts. This allows the company control over production, from substrate to coating, which is essential for customers in a variety of industries, especially aerospace and automotive.

Features & Highlights

  • Two flutes offer better chip-carrying capacity than end mills with more flutes, enhancing the tool's ability to remove material
  • Cobalt steel resists abrasion and high cutting temperatures, and has higher feed rates than high-speed steel
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials
  • Square nose end mills (also called square end) create sharp, unrounded cuts
  • Center-cutting design allows the end mill to plunge into material like a drill bit while also performing conventional surface milling

Additional Information

Brand:
Niagara Cutter
Manufacturer:
Niagara Cutter
Category:
Square Nose
Model:
N50162
MPN:
SP205-0.500-D2-S.3-Z2
UPC:
698036501624
Part Number:
SP205-0.500-D2-S.3-Z2
Size:
1/2 in
Publisher:
Niagara Cutter
Binding:
Misc.
Package Weight:
0.3 pounds
Package Size:
0.8 x 0.6 x 3.3 inches

 


Have questions about this item (SP205-0.500-D2-S.3-Z2), or would like to inquire about a custom or bulk order?


If you have any questions about this product by Niagara Cutter, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Name:
Email Address:
Your Message:

Related Best Sellers


mpn: FBA_1242, ean: 0647829664169,
6 Piece 2 flute high speed steel end mill set (3/8'' shank, center cut, high speed steel and single ended.) The set comes with a wooden stand. Sizes: 1/8'', 3/16'', 1/4'', 5/16'', 3/8'', and 1/2''.6 piece HSS end mill set. 2 flute, single end. Center...

mpn: KCT131063,
1/2 Inch Diameter Solid Carbide End Mill - Single End 1/2'' Shank 1-1/4'' Length of Cut 3'' Overall Length 4 Flute Carbide - Single End.Made In the USA. 1/2 Shank diameter. 1-1/4 Length of Cut. 3 Overall Length. 4 Flutes.

mpn: 56064025822,
Center Cutting / Standard LengthHigh Speed Steel. Mill Diameter: 7/8''. Shank Diameter: 1/2''. Length of Cut: 1-1/2''. Overall Length: 3-1/2''.

mpn: KCT129908,
1/2 Inch Diameter Solid Carbide End Mill - Single End 1/2'' Shank 1'' Length of Cut 3'' Overall Length 2 Flute Carbide - Single End.Premium Sub-Micrograin Carbide End Mill Made In the USA. 1/2'' Shank Diameter. 1'' Flute Length (Length of Cut), 30 De...