resdent Poly Strapping Tensioner & Cutter Manual Banding Strapping Tools for Polyester Polyproplyn 1/2'' - 3/4'' Strap

WHAT ELSE YOU NEED 1)plastic strapping 2) strapping open seal or strapping self-lock buckle (no need for sealer) 3) strapping sealer or sealess sealer (no need for seals or buckles) HOW TO CHOOSE STRAPPING Differenct features: 1) polypropylene is an economical material designed for light to medium duty unitizing, palletizing and bundling This product offers higher elongation at break but tends to have irrecoverable dead stretch with constant stress polypropylene strapping will lose about 50% of the applied tension within one hour, and that this tension loss is accelerated with increases in ambient temperature. 2) polyester is one of the strongest plastic strapping products and are used as a viable alternative to steel strapping in some industries Polyester provides excellent retained tension on rigid loads. Its excellent recovery properties help a load absorb impact without strap breakage. Choose the appropriate strapping according to your needs HOW TO STRAPPING 1. Squeeze the handle to lift the gripping jaw 2. Thread the free end of the strap through the back of the tool under the gripping jaw, leaving approximately 1″ of overhang front of the tool. 3. Wrap the strap around the load4. Take the end of the strap still attaching to the coil and thread it through the cutter housing and the shaft slot 5. Swing the handle to tension the strap 6. Place seal on both straps and using the sealer to crimp 7. Squeeze the handle to cut the strap USE EXAMPLES INCLUDE:Bundling items together for handling and shipment: newspapers, pipe, lumber, concrete block, etc.Attaching items to pallets, skids, and cratesReinforcing wooden boxes, crates, and corrugated boxes, such as gaylordsHolding bales of agricultural products or textiles Securing coils of steel or paper

Features: Main function is use to form wire, flat metal and tubing into clamps, handles, brackets, hooks and coils. Made of strong steel that is so stable and durable for using. It can attach easily to work bench or vise,so that you can make angle b...

Specification: Brand newMaterial: aluminum alloy+plasticSize: approx. 260*60mmTube length: approx. 210mmBend angle ≤ 180°Bending tube diameter: 6/8/10mmInner Diamete of Spring Bending Tube: 1/4″, 5/16″, 3/8″, 1/2″, 5/8″.Usage: use for be...

Includes dies for 1/2, 3/4, 1, 1-1/4, 1-1/2'' diameter bends. Installs on any vise and also could and beds a variety of wires. Handles up to 3/8'' solid material. Forms round, square, and flat stock. Shapes hooks, ''S'' loops and others. Bends 3/16''...

From start to final bend, the hilmor Tri-Tube Bender has you covered. It begins with simple sizing. There are indicators in the handles to help you correctly identify the tube size. After that, it's as simple as aligning it with its color-coded indic...