Micro Mesh 9 Sanding Sheet Introductory Woodworkers Kit with a 2 inch by 3 inch Foam Sanding Block


Micro Mesh 9 Sanding Sheet Introductory Woodworkers Kit with a 2 inch by 3 inch Foam Sanding Block by Micro Mesh at Oahu Handyman. MPN: 3KWPACK. Hurry! Limited time offer. Offer valid only while supplies last. Micro Mesh is a unique cushioned abrasive that produces a very fine and uniform scratch pattern. The nine grades of abrasives range from 1500 grit to 12000 grit. The 1500 is similar in grit range to conventional 400 grit wet/dry sandpaper. The 12000 will leave a scratch pattern that cannot be detected by the human eye and produces a wonderful looking finish. Micro Mesh abrasives can polish to a high reflective state or leave a matte or satin finish depending upon where you stop while using the s


Micro Mesh 9 Sanding Sheet Introductory Woodworkers Kit with a 2 inch by 3 inch Foam Sanding Block by   Micro Mesh
4.2 out of 5 stars with 50 reviews
Condition: New
Availability: In Stock
$16.00


Quantity:  

 


Product Description & Reviews

Micro Mesh is a unique cushioned abrasive that produces a very fine and uniform scratch pattern. The nine grades of abrasives range from 1500 grit to 12000 grit. The 1500 is similar in grit range to conventional 400 grit wet/dry sandpaper. The 12000 will leave a scratch pattern that cannot be detected by the human eye and produces a wonderful looking finish. Micro Mesh abrasives can polish to a high reflective state or leave a matte or satin finish depending upon where you stop while using the series of abrasive grits. The higher the number grit you step up to, the glossier the finish will be. Before starting the Micro Mesh cycle of abrasive sanding, coarse sanding should be done using up to 320 grit sandpaper. Shaping, sawing or turning of the work piece should be complete.Begin with 1500 Micro Mesh. Sand until all of the sandpaper scratches are removed. Continue with the MICRO-MESH series and cycle up to the desired look (1800, 2400, 3200, 3600, 4000, 6000, 8000, 12000). Thinned lemon oil or Danish oil can be applied as a finish on bare wood. Micro Mesh performs very well in conjunction with polyurethane, polyester, epoxy, lacquer and so on. Follow the manufacturer's recommended cure times prior to re-coating or applying the finish coat. When you are applying multiple coats, sand from 1500 Micro Mesh to 3200 or 3600 between coats to remove any orange-peel or dirt. After the final coat has fully cured, polish the surface beginning with 2400 Micro Mesh and continue through the series (3200-12000) until the desired gloss is achieved. Satin finishes are achieved by sanding up to the 3600 grade. The satin finish gets progressively higher in gloss through the 6000 step. High gloss finishes will appear by the 6000 through 12000 step. The wood, the finish used and personal preference determine where to stop. Micro-Gloss liquid abrasive can be hand rubbed onto the finish following the 12000 Micro Meshstep for an "ultra" high gloss finish.

Features & Highlights

  • Micro Mesh is a unique cushioned abrasive that produces a very fine and uniform scratch pattern. The nine grades of abrasives range from 1500 grit to 12000 grit. The 1500 is similar in grit range to conventional 400 grit wet/dry sandpaper. The 12000 will leave a scratch pattern that cannot be detected by the human eye and produces a wonderful looking finish. Micro Mesh abrasives can polish to a high reflective state or leave a matte or satin finish depending upon where you stop.
  • Before starting the Micro Mesh cycle of abrasive sanding, coarse sanding should be done using up to 320 grit sandpaper. Shaping, sawing or turning of the work piece should be complete.Begin with 1500 Micro Mesh. Sand until all of the sandpaper scratches are removed. Continue with the MICRO-MESH series and cycle up to the desired look (1800, 2400, 3200, 3600, 4000, 6000, 8000, 12000). Thinned lemon oil or Danish oil can be applied as a finish on bare wood.
  • Micro Mesh performs very well in conjunction with polyurethane, polyester, epoxy, lacquer and so on. Follow the manufacturer's recommended cure times prior to re-coating or applying the finish coat. When you are applying multiple coats, sand from 1500 Micro Mesh to 3200 or 3600 between coats to remove any orange-peel or dirt. After the final coat has fully cured, polish the surface beginning with 2400 Micro Mesh and continue through the series (3200-12000) until the desired gloss is achieved.
  • Satin finishes are achieved by sanding up to the 3600 grade. The satin finish gets progressively higher in gloss through the 6000 step. High gloss finishes will appear by the 6000 through 12000 step. The wood, the finish used and personal preference determine where to stop. Micro-Gloss liquid abrasive can be hand rubbed onto the finish following the 12000 Micro Meshstep for an "ultra" high gloss finish.
  • 🇺🇸 This Made In the USA KIT INCLUDES: 1 each of the following grit 3 inch by 4 inch sheets: 1500, 1800, 2400, 3200, 3600, 4000, 6000, 8000 and 12000. Also included is a 2 inch by 3 inch foam sanding block. Micro Mesh can be used wet or dry.

Additional Information

Brand:
Micro Mesh
Manufacturer:
Micro Mesh
Category:
Power Sander Parts & Accessories
MPN:
3KWPACK
UPC:
810948010463
EAN:
7241871045629
Part Number:
3KWPACK
Publisher:
Micro Mesh
Binding:
Misc.
Item Size:
2.6 x 2 x 6 inches
Package Weight:
0.04 pounds
Package Size:
2.99 x 1.1 x 5.51 inches

 


Have questions about this item (3KWPACK), or would like to inquire about a custom or bulk order?


If you have any questions about this product by Micro Mesh , contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Name:
Email Address:
Your Message:

Related Best Sellers


mpn: PXRASS01, ean: 0853112007319,
The PORTER CABLE stainless steel Wheel fits on all PORTER CABLE restorer tools. It can be used to raise the grain on hard woods, polish stainless steel, aluminum and steel. It also can be used for heavier rust removal.Fits all PORTER CABLE restorer t...

mpn: 499097, ean: 4014549180525,
Building on the industry-leading performance of the original Rubin abrasive, Festool's all-new Rubin 2 sets a new standard for efficiency, perfect for all wood-finishing applications. Rubin 2 is designed to minimize the time spent on each level with ...

mpn: AR140A111, ean: 0788490865506,
Aluminum oxide paper for long life and smooth finish Special rectangle shape is ideal for sanding in tight areas and intricate work Application: raw wood,pine board,hardwood,furniture,metal,aluminum,painted surfaces,fiberglass,plastic,autobody For RY...

ean: 0751940840163,
This is a high quality sanding belt is designed specifically to provide outstanding life and durability for many wood belt sanding applications. It is made with a special open coat A/O grain.and a strong X weight poly cotton cloth backing. Belts are ...